IC687BEM744

Rated 5 with 19 reviews
top legal disclaimer
top legal disclaimer

credit cards accepted
better business bureau

IC687BEM744

Revisions: BA 
Description: The GE Fanuc Automation IC687BEM744 FIP Bus controller can operate with up to 128 devices. It has a serial port connector and 2 FIP bus connectors. It can be set up through the CIMPLICITY Control 90 software.
In Stock Ships Today
Request a quote for IC687BEM744

Description:

The GE Fanuc Automation IC687BEM744 FIP Bus controller can operate with up to 128 devices. It has a serial port connector and 2 FIP bus connectors. It can be set up through the CIMPLICITY Control 90 software.



top legal disclaimer
disclaimer
credit cards
better business bureau
Revisions: BA 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via DHL, UPS, Fedex, and TNT
Repairs: We offer repair service for the IC687BEM744.
Exchange: Exchange credit for your defective unit available.

To Speak to a sales representative for pricing & lead time:

phone

International
919-205-4392

Rated 5 with 19 reviews

    Technical Specifications for IC687BEM744

BrandGE Fanuc
SeriesRx7i PACsystem
Part NumberIC687BEM744
EquipmentController
TypeFIP Bus
Devices2.5 MHz
WorldFIP OperationsUp to 128
Status LED6
Restart PushbuttonYes
Serial PortYes. 15-pin connector
FIP Bus ConnectorsYes, two 9-pin connectors
Network DiagnosticsYes
SoftwareCIMPLICITY Control 90
BrandGE Fanuc
SeriesRx7i PACsystem
Part NumberIC687BEM744
EquipmentController
TypeFIP Bus
Devices2.5 MHz
WorldFIP OperationsUp to 128
Status LED6
Restart PushbuttonYes
Serial PortYes. 15-pin connector
FIP Bus ConnectorsYes, two 9-pin connectors
Network DiagnosticsYes
SoftwareCIMPLICITY Control 90
s

About IC687BEM744

The IC687BEM744 controller is a FIP Bus controller from the Rx7i PACsystem series of programmable logic controllers by GE Fanuc Automation. This controller can be used in any system that includes compatible equipment from the Rx7i series. A maximum of 4 FIP bus controllers can be included in a PLC Expansion rack, but installing more than 4 is not recommended. This specific bus controller is one of the 4 models that come in the series and it consists of a controller that is half the size so it can occupy a half slot. The GE Fanuc Automation IC687BEM744 FIP Bus controller can be installed in an integrated rack and operate at 2.5 Megahertz. This controller can serve as an I/O controller for different devices that are in I/O nests and for different field control I/O modules in locations registered on the FIP Bus.


The GE Fanuc Automation IC687BEM744 FIP Bus controller can be used with 128 devices that can be field control stations, remote I/O racks, generic devices, and Series 90-70 PLCs. This controller comes with 6 LED indicators that are located on the front of the device and provide visual updates about the current status of the controller and communications activity. The GE Fanuc Automation IC687BEM744 FIP Bus controller comes with two 9-pin connectors that provide attachments for 1 or 2 FIP busses. This controller includes a network configuration tool that is used to define the network segments and to identify new or existent devices. The software used to configure each piece of equipment is the CIMPLICITY Control 90 software.

Repair Services for IC687BEM744

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC687BEM744. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for IC687BEM744

Please refer to the manual for more information about the IC687BEM744 such as the wiring diagrams, data sheets, firmware information and migration or obsolescence details.

Revision Part # Also Known as Availability
IC687BEM744BA
IC687BEM744-BA, Series BA, Rev BA Request Quote
Common misspellings:
  • 1C687BEM744
  • IC6b7BEM744
  • IC6878EM744
  • IC687BEM7A4
  • IC687BEM74A
  • IC687BEM744

Dimensions For IC687BEM744

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For IC687BEM744

Resolutions For IC687BEM744

Technical Specifications
BrandGE Fanuc
SeriesRx7i PACsystem
Part NumberIC687BEM744
EquipmentController
TypeFIP Bus
Devices2.5 MHz
WorldFIP OperationsUp to 128
Status LED6
Restart PushbuttonYes
Serial PortYes. 15-pin connector
FIP Bus ConnectorsYes, two 9-pin connectors
Network DiagnosticsYes
SoftwareCIMPLICITY Control 90
BrandGE Fanuc
SeriesRx7i PACsystem
Part NumberIC687BEM744
EquipmentController
TypeFIP Bus
Devices2.5 MHz
WorldFIP OperationsUp to 128
Status LED6
Restart PushbuttonYes
Serial PortYes. 15-pin connector
FIP Bus ConnectorsYes, two 9-pin connectors
Network DiagnosticsYes
SoftwareCIMPLICITY Control 90
About

The IC687BEM744 controller is a FIP Bus controller from the Rx7i PACsystem series of programmable logic controllers by GE Fanuc Automation. This controller can be used in any system that includes compatible equipment from the Rx7i series. A maximum of 4 FIP bus controllers can be included in a PLC Expansion rack, but installing more than 4 is not recommended. This specific bus controller is one of the 4 models that come in the series and it consists of a controller that is half the size so it can occupy a half slot. The GE Fanuc Automation IC687BEM744 FIP Bus controller can be installed in an integrated rack and operate at 2.5 Megahertz. This controller can serve as an I/O controller for different devices that are in I/O nests and for different field control I/O modules in locations registered on the FIP Bus.


The GE Fanuc Automation IC687BEM744 FIP Bus controller can be used with 128 devices that can be field control stations, remote I/O racks, generic devices, and Series 90-70 PLCs. This controller comes with 6 LED indicators that are located on the front of the device and provide visual updates about the current status of the controller and communications activity. The GE Fanuc Automation IC687BEM744 FIP Bus controller comes with two 9-pin connectors that provide attachments for 1 or 2 FIP busses. This controller includes a network configuration tool that is used to define the network segments and to identify new or existent devices. The software used to configure each piece of equipment is the CIMPLICITY Control 90 software.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC687BEM744. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC687BEM744. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the IC687BEM744 such as the wiring diagrams, data sheets, firmware information and migration or obsolescence details.

Revision Part # Also Known as Availability
IC687BEM744BA
IC687BEM744/BA, Series BA, Rev BA Request Quote

Common misspellings:
  • IC6b7BEM744
  • IC6878EM744
  • IC687BEM7A4
  • IC687BEM74A
  • IC687BEM744
PDF