IC695FTB001 - In Stock | GE Fanuc - GE IP - Emerson Series 90-30

IC695FTB001

Rated 4.7 with 5 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

IC695FTB001

Revisions: AA 
Description: The IC695FTB001 fiber I/O terminal block by GE Fanuc is intended for the PACMotion RX3i systems and its main purpose is to improve the I/O capability of the systems. The IC695FTB001 terminal block requires 19.2 to 28.8 Volts DC voltage and it has an output current of 0.5 Amps at 5 Volts. The unit provides eight 24 Volts-rated outputs, 16 general-purpose inputs rated at 24 Volts, 4 differential I/O rated at 5 Volts, and eight 5 Volts-rated inputs.      
In Stock Ships Today
Request a quote for IC695FTB001

Description:

The IC695FTB001 fiber I/O terminal block by GE Fanuc is intended for the PACMotion RX3i systems and its main purpose is to improve the I/O capability of the systems. The IC695FTB001 terminal block requires 19.2 to 28.8 Volts DC voltage and it has an output current of 0.5 Amps at 5 Volts. The unit provides eight 24 Volts-rated outputs, 16 general-purpose inputs rated at 24 Volts, 4 differential I/O rated at 5 Volts, and eight 5 Volts-rated inputs.      


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: AA 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the IC695FTB001.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 5 reviews

    Technical Specifications for IC695FTB001

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC695FTB001
Power requirements19.2 to 28.8 Volts DC with 0.45 Amps at 24 Volts
Power output at 5 Volts0.5 Amps (maximum)
Number of outputs at 24 Volts8
Number of general-purpose inputs at 24 volts16
Number of differential inputs/outputs at 5 Volts4
Number of inputs at 5 Volts8
Number of analog inputs2 (+/-10 Volts differential)
Number of analog outputs2 (+/-10 Volts single-ended)
PACMotion module interfaceFiber optic cable
MountingDIN rail
Product Lifecycle Status*Discontinued/Obsolete

*The GE Fanuc IC695FTB001 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement IC695FTB001 units instead of migration.

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC695FTB001
Power requirements19.2 to 28.8 Volts DC with 0.45 Amps at 24 Volts
Power output at 5 Volts0.5 Amps (maximum)
Number of outputs at 24 Volts8
Number of general-purpose inputs at 24 volts16
Number of differential inputs/outputs at 5 Volts4
Number of inputs at 5 Volts8
Number of analog inputs2 (+/-10 Volts differential)
Number of analog outputs2 (+/-10 Volts single-ended)
PACMotion module interfaceFiber optic cable
MountingDIN rail
Product Lifecycle Status*Discontinued/Obsolete

*The GE Fanuc IC695FTB001 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement IC695FTB001 units instead of migration.

s

About IC695FTB001

The IC695FTB001 terminal block is an active fiber I/O interface device that is intended for use within industrial environments. The terminal block is made by GE Fanuc and it is designed for use with the GE Fanuc PACMotion RX3i systems. This fiber I/O terminal block can be configured for additional motion-specific functionalities, and it has special marker inputs, touch probe inputs, home switches, and over travel limit switches for these functionalities. The IC695FTB001 terminal block has multiple inputs and outputs that can significantly extend the capabilities of the system. The unit mounts on a standard DIN rail and it has removable terminal block headers that allow for easy operation. The unit uses a 35-millimeter DIN rail and it should be mounted in a vertical position in order to avoid over-heating. The mounting dimensions (W x H x D) of the unit are 141.2 x 125.5 x 62.5 millimeters (5.56 x 4.94 x 2.46 inches).



 



The IC695FTB001 I/O terminal block operates on voltage range of 19.2 Volts DC to 28.8 Volts DC and it has a current rating of 0.45 Amps at 24 Volts. In addition to that, the unit’s power consumption ratings in steady-state operation include 4 Watts or 80 milliAmps at 5 Volts DC, 2.16 Watts or 90 milliAmps at 24 Volts DC (ADC405), and 7 Watts or 140 milliAmps at 5 Volts DC and 1.2 Watts or 50 milliAmps at 24 Volts DC (ADC410). The IC695FTB001 unit includes quad encoder open-circuit detection and its I/O functions can be assigned when the configuration of the hardware module takes place. The terminal block also includes electronic overload protection and 5 Volts of output power with a maximum current rating of 0.5 Amps. The IC695FTB001 fiber I/O terminal block uses a fiber optic cable for interfacing with a PACMotion module and the maximum cable length that it can support is 100 meters.    



Repair Services for IC695FTB001

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC695FTB001. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for IC695FTB001

Please refer to the manual for more information about the IC695FTB001 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC695FTB001AA
IC695FTB001-AA, Series AA, Rev AA Request Quote
Common misspellings:
  • 1C695FTB001
  • IC695FT8001
  • IC695FTBo01
  • IC695FTB0o1
  • IC695FTB00l
  • IC695FTB001

Dimensions For IC695FTB001

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For IC695FTB001

Resolutions For IC695FTB001

About

Technical Specifications for IC695FTB001

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC695FTB001
Power requirements19.2 to 28.8 Volts DC with 0.45 Amps at 24 Volts
Power output at 5 Volts0.5 Amps (maximum)
Number of outputs at 24 Volts8
Number of general-purpose inputs at 24 volts16
Number of differential inputs/outputs at 5 Volts4
Number of inputs at 5 Volts8
Number of analog inputs2 (+/-10 Volts differential)
Number of analog outputs2 (+/-10 Volts single-ended)
PACMotion module interfaceFiber optic cable
MountingDIN rail
Product Lifecycle Status*Discontinued/Obsolete
BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC695FTB001
Power requirements19.2 to 28.8 Volts DC with 0.45 Amps at 24 Volts
Power output at 5 Volts0.5 Amps (maximum)
Number of outputs at 24 Volts8
Number of general-purpose inputs at 24 volts16
Number of differential inputs/outputs at 5 Volts4
Number of inputs at 5 Volts8
Number of analog inputs2 (+/-10 Volts differential)
Number of analog outputs2 (+/-10 Volts single-ended)
PACMotion module interfaceFiber optic cable
MountingDIN rail
Product Lifecycle Status*Discontinued/Obsolete

*The GE Fanuc IC695FTB001 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement IC695FTB001 units instead of migration.

About IC695FTB001

The IC695FTB001 terminal block is an active fiber I/O interface device that is intended for use within industrial environments. The terminal block is made by GE Fanuc and it is designed for use with the GE Fanuc PACMotion RX3i systems. This fiber I/O terminal block can be configured for additional motion-specific functionalities, and it has special marker inputs, touch probe inputs, home switches, and over travel limit switches for these functionalities. The IC695FTB001 terminal block has multiple inputs and outputs that can significantly extend the capabilities of the system. The unit mounts on a standard DIN rail and it has removable terminal block headers that allow for easy operation. The unit uses a 35-millimeter DIN rail and it should be mounted in a vertical position in order to avoid over-heating. The mounting dimensions (W x H x D) of the unit are 141.2 x 125.5 x 62.5 millimeters (5.56 x 4.94 x 2.46 inches).



 



The IC695FTB001 I/O terminal block operates on voltage range of 19.2 Volts DC to 28.8 Volts DC and it has a current rating of 0.45 Amps at 24 Volts. In addition to that, the unit’s power consumption ratings in steady-state operation include 4 Watts or 80 milliAmps at 5 Volts DC, 2.16 Watts or 90 milliAmps at 24 Volts DC (ADC405), and 7 Watts or 140 milliAmps at 5 Volts DC and 1.2 Watts or 50 milliAmps at 24 Volts DC (ADC410). The IC695FTB001 unit includes quad encoder open-circuit detection and its I/O functions can be assigned when the configuration of the hardware module takes place. The terminal block also includes electronic overload protection and 5 Volts of output power with a maximum current rating of 0.5 Amps. The IC695FTB001 fiber I/O terminal block uses a fiber optic cable for interfacing with a PACMotion module and the maximum cable length that it can support is 100 meters.    



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC695FTB001. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC695FTB001. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the IC695FTB001 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC695FTB001-AA
IC695FTB001/AA, Series AA, Rev AA Request Quote

Common misspellings:
  • IC695FT8001
  • IC695FTBo01
  • IC695FTB0o1
  • IC695FTB00l
  • IC695FTB001
PDF