IC200ALG266

The IC200ALG266 is a VersaMax analog input module. This module is mainly used in distributed I/O architecture and utilized to interface analog measuring instruments and feedback devices that generate signal voltage range of 10 VDC to + 10 VDC. This input module comes with an analog to digital signal conversion resolution of 15-bits or 0.3125mV per count. The IC200ALG266 is powered by the backplane power supply with current draw of 150 mA, maximum. It does not require an external power supply to activate each input channels as the embedded Fifteen (15) analog input channels support sink wiring configuration. This module has accuracy of +/-0.3% typical of full scale, +/-0.5% maximum of full scale at operating temperature of 25 Degrees Celsius and +/-1% maximum of full scale at 60 Degrees Celsius. The individual channels of the IC200ALG266 is capable of detecting failure in the conversion of the analog signal. This happens when the AD converter delivers an output that is greater than 6% of the full-scale value. This error is reported to the CPU which can be represented to partner Human Machine Interface (HMI) and Supervisory Control and Data Acquisition (SCADA) systems as Fault or Bad signal quality. The IC200ALG266 has software configurable input state in reaction to CPU stop or module error. These options include default or last state operation which is applicable in implementing safe start-up especially in the event of power interruptions. Each input channels has filter response of 32 Hz +/-20% with channel update rate of 7.5 ms.

The GE Fanuc Automation IC200ALG266 module is a certified Versamax input module that has been manufactured by GE Fanuc Automation. This module has been designed to provide an interface to different input devices. This interface is achieved through connections to the 15 input channels that are included in the module. These inputs are analog and the module comes with an LED that indicates when the drive has been properly configured and able to operate and this LED is the OK LED. The GE Fanuc Automation IC200ALG266 Versamax input module comes with protective features that ensure safe operations and help to extend the life of both the module and the inputs. These protective features protect the module from overvoltage levels higher than 30 Volts DC. The operations of each input are individual operations, meaning that if one of them is in a fault state, it will not affect the functioning of the rest of the inputs. The GE Fanuc Automation IC200ALG266 Versamax input module operates with a backplane current consumption rating of 50 milliamps to 100 milliamps. It does not operate with an external power supply. The IC200ALG266 Versamax input module has a resolution of 15 bits, although if it exposed to radiofrequency interference, it might need to be derated by up to +/-2%. The module comes filtered with channel update rate of 7.5 milliseconds. The input current range of the module goes from -10 VD to + 10 VDC.