IC200MDL750

The IC200MDL750 is a high-density digital output module that is manufactured by Emerson Automation, formerly by GE Intelligent Platforms (GE IP). This module mainly features Thirty-Two (32) output channels in Two (2) groups of Sixteen (16) output channels each. This module is typically utilized to actuate or energize electrical loads such as solenoid actuated devices, relay coils, pilot lamps and other devices with dual-state operation only particularly, binary or On and Off. It is compatible for use with 24 VDC rated devices as the IC200MDL750’s nominal voltage output is 12 / 24 VDC with an output voltage range of 10.2 - 30 VDC along an output current of 0.5 A per channel. The IC200MDL750 is part of the VersaMax I/O platform, designed to be used as a component module of a distributed I/O architecture. It requires use of a carrier base that hosts the wiring terminals intended for the module. With the carrier base, the module can be installed in horizontal or vertical orientation, onto a standard 35 mm DIN rail. The IC200MDL750 physical measurement is 110 mm (4.3 in) x 66.8 mm (2.63 in) x 50 mm (1.956 in), excluding the dimension of the carrier base. Similar to the other I/O modules, each output channel is provided with an individua LED status indicator that is used to locally monitor the activity of the module per channel. In addition, an OK LED is also provided, depicting the active supply of power from the backplane which is maximum of 90 mA.

The IC200MDL750 module is a Versamax output module. It is a 32-point output module and it runs with a voltage rating of 24 Volts DC. It comes with 0.5 Amps of rated current per point. It consumes a backplane current of 90 milliamps. It is compact in size and it has a weight of 0.90 kilograms. The IC200MDL750 module is a positive logic output module with 2 groups of 16 outputs. The 32 total outputs have a DC+ terminal and a DC- terminal. An external suppression circuit is used with the output module when the wiring is connected with inductive loads. The module is certified to be operated in a Class I Division 2 rated hazardous location. These module has channel LEDs that illuminate when the field power is present. The channels have an on response time of 0.2 milliseconds maximum, and an off response time of 1 millisecond maximum. The output leakage current of the IC200MDL750 module is 0.5 milliamps at 30 Volts DC. The output module can be easily mounted using a DIN rail. The temperature of the module should be maintained between 0 and 30 degrees Celsius to avoid thermal derating. The number of points that can be operated at a time depends on the ambient temperature and the orientation of the module.