IC200MDL930

The IC200MDL930 is an Eight (8) channel output module that belongs to the VersaMax I/O platform, formerly by GE Intelligent Platforms (GE IP), currently under Emerson Automation. This module comes with individually isolated relay output channels in Normally Open (N.O.) or Form A contact position. The module’s built-in relay are of Fixed coil, moving armature type with relay contacts made of silver alloy. These contact outputs are applicable in energizing electrical loads operating at different voltage categories specifically, 0 to 125VDC and 0 to 265VAC at 47 to 63Hz AC voltage frequency. The IC200MDL930 contact outputs are essentially dry contact outputs. It requires an external supply voltage source to conduct the appropriate voltage to the connected electrical load. It may be used with resistive or conductive loads however, with conductive loads, external protection or suppression circuits such as fuse is recommended for installation. The current rating of the output contacts are minimum of 10mA per point; 2.0A for 5 to 265VAC, maximum; 2.0A for 5 to 30 VDC, maximum and 0.2A for 31 to 125 VDC, maximum. All current ratings are rated for resistive loads. In addition, the nominal external supply voltage ratings of the contact outputs are 5/24/125VDC and 120/240VAC. The IC200MDL930 has a maximum backplane current draw of 245 mA when all outputs energized. This module is provided with individual channel indicators to depict the energization state of each output channel. It also has a single module OK LED to indicate the active supply of backplane power received by the module.

The IC200MDL930 module is an 8-point output module manufactured by GE Fanuc. It is part of the Versamax family. The output points of the module are isolated individually. The output module draws 245 milliamps power from the backplane with all outputs activated. The IC200MDL930 module is fully compatible with both AC and DC loads. The 8 points of the module have their own LED indicators to indicate the presence of field power through the points. The module contact point is by default closed during the active period of the module. The output bit is set to 1 at this point. The installation of the module is easy when using the rack mounting method on the backplane. The output module is certified with the CE, cULus, and other industrial standards. It is made for use in global settings. The IC200MDL930 output module is an intelligent device and it can perform faster processing than other similar modules. This output module is free from output leakage current. The relays of each point are designed with a fixed coil and an armature. The response time for on/off is slower than it is other Versamax modules, at a time period of 10 milliseconds. The module comes with a switching frequency of 20 cycles per minute for inductive loads. No internal fuse or snubber are present in this output module variant. The IC200MDL930 module is cooled with forced air cooling to keep its ambient temperature in a range between 0 and 30 degrees Celsius. Thermal derating starts when the ambient temperature exceeds the maximum temperature rating.