IC200NDR001

The IC200NDR001 controller by GE Fanuc is a 24 Volts DC NANO PLC system controller. It comes with single communication port. An RJ-45 port is present on the front for a local area network. It comes with 6 inputs and 4 outputs. The controller uses the Versa Pro version 1.1 software for configuration and programming. The NANO PLC is equipped with Flash memory for program storage. It can connect up to 10 I/O points at a time. The IC200NDR001 NANO controller has up to 1280 global references. The controller also has 128 status bits and it also has 256 registers. The ambient temperature should be set between 0 and 55 degrees Celsius for normal operation.

The IC200NDR001 NANO controller has a processor with a clock speed of 28 Mhz. The execution time for boolean operation is 1.2 microseconds. This controller follows the SNP, SNP X, and RTU slave protocols. The GE controller can be mounted using a DIN rail. No removable terminal strips are present in this controller variant. The IC200NDR001 controller comes with modem compatibility and it supports a multi drop configuration with the RS-485 adapter. The power supply holdup time is 10 milliseconds. The inrush current of the NANO controller is 1 Amp for 30 Volts DC. The life of the relay in the controller is 200,000 electrical operations when applied with a load of 2 Amps. The IC200NDR001 current has been marked with the CE rating. It can accommodate shocks of 15 G for up to 11 milliseconds and vibrations of 57 to 500 Hertz.