VG7443LT+423GGC
Optimized for efficiency, the VG7443LT+423GGC control valve provides an operating temperature range of 2 to 65°C and can handle a maximum fluid temperature of up to 121°C with water and saturated stea
Call
5.0
Free UPS Ground on All Parcel Orders!
+1 (919) 205-4392
Johnson Controls VG7000 Series
The Johnson Controls VG7000 Series valves are bronze control valves that regulate steam and water flow in HVAC systems. They have cast bronze bodies, brass bonnets, and brass or stainless steel trim. These valves are available in 3-way mixing models and in 2-way models with normally open/push-down-to-close setups or normally closed/push-down-to-open setups. The 3-way valves have linear flow characteristics, and the 2-way valves have equal percentage flow characteristics. The VG7000 Series valves can support 50/50 glycol solutions in addition to hot and chilled water service. These valves can be controlled by pneumatic or electric actuators.
Learn more
Browse VG7000 Series
Browse available units in our catalog of VG7000 Series.
VG7443NT+3008EP
With a flow coefficient (Cv) of 11.6, this globe valve weighs 6.9 lbs and has a valve size of 1 inch with NPT threading. Operating within a spring range of 9 to 13 psig, it achieves a closeoff pressur
Call
5.0
VG7443PT+3008D
This model has a 1-1/4 inch valve size and boasts a Cv rating of 18.5. It employs a pneumatic actuator with a spring operating range of 4 to 8 psig. This valve operates comfortably within a temperatur
Call
5.0
VG7443PT+423AGA
Weighing 10 lbs, the valve is constructed from cast bronze and has a size of 1-1/4 inches. The unit supports an end connection type of threaded NPT. It utilizes a stainless steel trim with an equal pe
Call
5.0
VG7443ST
Designed to handle flow rates with superior precision, the VG7443ST operates within a fluid temperature range of 2 to 170°C for water and supports pressures of up to 100 psig for saturated steam. It i
Call
5.0
VG7842ET+71CHGC
This valve is constructed from cast bronze and features threaded NPT connections. The valve has a control port flow coefficient of 1.8 Cv. It uses a VA7810-HGC-2 actuator, which operates on 24 VAC and
Call
5.0
VG7842GT+71CHGA
This bronze control valve performs efficiently with a size of 1/2 inch and a control port Cv rating of 4.6. It is equipped with a VA7810-HGA-2 actuator (non-spring-return) which operates on 24 VAC. Th
Call
5.0
VG7842GT+72CHGA
Featuring an impressive Cv factor of 4.6 (4.0 Kv), this control valve utilizes NPT threaded end connections. The actuator model is VA7820-HGA-2, operating on a proportional control type and is rated f
Call
5.0
VG7842GT+74CHGA
This three-way mixing valve features a Cv factor of 4.6 and is fitted with an actuator model VA7830-HGA-2 capable of delivering 180 lb min. stem force output. The valve is rated IP54 for ingress prote
Call
5.0
VG7842GT+74CHGC
This control valve is equipped with a standard threaded stem and utilizes threaded NPT connections for easy installation. The valve has a Cv rating of 4.6 and employs a spring return actuator alongsid
Call
5.0
Showing 201-210 of
274
results