HC-PQ23B-S1

The Mitsubishi Electric-produced HC-PQ23B-S1 servo motor is a member of the HC-PQ series and was created as a low-inertia servo motor using rare earth permanent magnets and focused winding methods. This little motor is designed to work in tandem with a Mitsubishi servo amplifier, which will effectively regulate its functioning. To provide trustworthy noise immunity, the serial connection between the amplifier and the servo motor is painstakingly protected from interference. TheHC-PQ23B-S1 provides varied performance characteristics ideal for electronic assembly, textile machines, indexing, and printing machine applications, with a power output rating of 200 Watts and a maximum speed of 4500 RPM in certain applications. The motor, which is supplied by a power supply with a 0.5 kVA capacity, can run continuously at speeds of up to 3000 RPM. It is crucial to remember that for maximum performance, the servo amplifier attached to the HC-PQ23B-S1 should run at a current of 20 Amps. The servo motor has a peak output torque of 1.92 Nm and a typical rated output torque of 0.64 Nm, which is more than enough power for demanding applications. For smooth and accurate motion control, a load-to-rotor inertia ratio of 30 times or less is advised. The motor exhibits its versatility by having a max output current of 6 Amps and a rated current of 1.5 Amps. The HC-PQ23B-S1 is also efficiently protected from dust, debris, and mild water exposure thanks to its IP44-certified housing, and it uses convection cooling for its cooling system. This servo motor, which weighs only 0.96 kg, provides a compact but potent answer to industrial automation demands.