MR-J2S-70B-U005
This AC servo amplifier features a rated output current of 5.1 A. It includes built-in dynamic braking and is compatible with both absolute and incremental encoders for feedback. The cooling system fa
Available
4.5
Free UPS Ground on All Orders!
+1 (919) 205-4392
Mitsubishi MELSERVO MR-J2
The MELSERVO MR-J2 or MELSERVO-J2 series of AC servo amplifiers from Mitsubishi contains servo amplifiers that support general-purpose interfaces. Some of the servo amplifiers in this series also support a built-in positioning function. The MR-J2 servo amplifiers are compatible with a variety of Mitsubishi Bulletin HC servo motors. The MR-J2 servo amplifiers have structures with IP00 ingress protection ratings. The brake option for the MR-J2 servo amplifiers is a built-in dynamic brake.
Learn more
Browse MELSERVO MR-J2
Browse available units in our catalog of MELSERVO MR-J2.
MR-J2S-350CP4-S484
This servo amplifier functions under a voltage frequency of 50/60 Hz. It has an IP00 rating, indicating no special protection against dust or moisture. Operating temperatures range from 0 °C to 55 °C,
Call
5.0
MR-J2S-CBL500MWH
This encoder cable measures 50 meters in length and has an approximate weight of 3 pounds. It is rated for operation in environments with a non-freezing temperature range of 0 to 40 degrees Celsius. T
Call
4.7
MR-J2S-10CP-S084
This position controller accommodates servo motors including HC-KFS, HC-MFS, and HC-UFS models. Weighing approximately 0.7 kg, it is compatible with CC-Link communication. The unit includes CN1A and C
Call
5.0
MR-J2S-350BPY096
The servo amplifier functions within a frequency range of 50 to 60 Hz and has an IP00 rating. It utilizes forced cooling and can operate at temperatures between 0°C and 55°C. For storage, it can withs
Call
4.6
MR-J2S-40D-S016
This unit has an output power of 400 Watts and can support current control. It can function within an operational frequency range of 50 to 60 Hertz while maintaining voltage stability with a fluctuati
Call
4.8
MR-J2S-110KA4
This AC servo amplifier operates at an input voltage of 380 to 480 VAC and has a rated output of 110 kW. Its functionality is optimized for a three-phase system suitable for frequencies of 50 or 60 Hz
Call
4.8
MR-J2S-100BPY096
In the MELSERVO MR-J2 series, the MR-J2S-100BPY096 controller module has a power output of 1 kW. It supports input voltages between 200 and 230 volts AC and operates effectively across a frequency ran
Call
4.8
MR-J2S-500B4
This servo drive operates efficiently within a permissible frequency fluctuation of ±5% and accommodates voltage variations between 323 and 528 Volts AC. Its ambient operational temperature ranges fro
Call
4.8
MR-J2S-350CP
With an output current capacity of 17.0 A, this amplifier incorporates an RS-422 serial communication interface and supports CC-Link and external digital inputs/outputs. The device is equipped with a
Call
4.6
Showing 381-390 of
401
results