C200H-DA003

The Omron C200H-DA003 C200H module is an output module that supports precise analog output functionalities for C200H series programmable controllers. It is designed to provide accurate output operation. The C200H-DA003 module operates as an interface between the programmable controller system and external devices. The module's outputs are analog. It has 8 output points. The C200H-DA003 module supports multiple output signal ranges, including signals ranges of -10 to 10V, 0 to 10V, and 1 to 5V, for use in different applications. Its output impedance rating is 0.5 ohms maximum, and its maximum output current rating is 12 mA. The C200H-DA003 module can achieve a resolution rating of 1/4000 (full scale), and it uses 16-bit binary data for precise data representation. The C200H-DA003 module has an accuracy of +/-0.3% of full scale at 23°C, +/-2°C, and +/-0.5% of full scale within a temperature range of 0°C to 55°C. This accuracy is crucial for maintaining consistency in control applications. The C200H-DA003 module's rapid conversion time of 1.0 ms/point enhances its real-time control capabilities. Its isolation mechanism is photocoupler isolation between the input terminals and the PC, though there is no isolation between individual output signals. The C200H-DA003 module supports external connectors through a 28-point terminal block with M3 screws for secure connections. Its power consumption ratings are 100 mA maximum at 5 VDC and 200 mA maximum at 26 VDC. The C200H-DA003 module is energy-efficient. Its dimensions are 34.5 x 130 x 128 mm (W x H x D), and its IP or Ingress Protection rating is IP30. The C200H-DA003 module weighs 0.992 lb or 450 g maximum.