Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Omron C500 C500-NC222-E

Product image is representative; revision or series may vary. Contact us to request a specific version.

C500-NC222-E

|
Need a Specific Revision?

The C500-NC222-E, created by Omron, serves as a position control unit managing two axes. Complying with specific voltage parameters, it operates on a minimum ON voltage of 12V and a maximum OFF voltage of 4V.

Out of stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more

Technical specifications for C500-NC222-E

ManufacturerOmron
Product LineC500
Part NumberC500-NC222-E
Weight0.63 lbs (0.28 kg)
Description of ModulePosition Control Units
ON Voltage12V min
OFF Voltage4V max
ON Delay Time2 ms or less
OFF Delay Time2 ms or less
Number of Controlled AxisTwo-axis
Maximum Open/Close CapacityOpen collector 40 mA at 24 VDC
Leak Current0.1 mA or less
Residual Voltage1.1 V or less
External Power Supply Voltage24 VDC ± 10%
Output TypeSpeed voltage
Output Voltages–10 to 10 VDC
Output Current10 mA (approx. 1-kW impedance)
Input Voltage24 VDC ± 10%
Input Current8 mA
Request a Repair

The Omron C500-NC222-E is a position control unit intended for controlling two axes. This module demonstrates efficiency with an ON voltage requirement of at least 12 volts and a maximum OFF voltage of 4 volts. The response times are quick, with an ON delay of 2 milliseconds or less, and similarly, the OFF delay is 2 milliseconds or less.

Configured to work with an external power supply voltage typically at 24 VDC ± 10%, this module maintains a leak current of only 0.1 mA or less. The residual voltage measured at the output is minimal, not exceeding 1.1 volts.

In terms of output specifications, the C500-NC222-E provides speed voltage outputs ranging from -10 to 10 VDC, with a maximum output current capacity of 10 mA, corresponding to approximately 1-kW impedance. The input specifications also adhere to a 24 VDC threshold with a tolerance of ± 10%, and the input current drawn by the unit is 8 mA. This configuration promotes precise control over the operated axes while ensuring minimal electrical noise.