CQM1H-MAB42

Omron's CQM1H-MAB42 I/O board is a flexible analog I/O board that was developed for precise and dependable operation in a variety of different applications. It was made to be used in Omron CQM1H programmable controller systems. The CQM1H-MAB42 analog I/O board is classified as an Omron “inner board,” and it was designed to be installed in the slot labeled “Inner Board Slot 2” on an Omron CQM1H-CPU51/61 CPU. The Omron CQM1H-CPU51/61 CPU can only host 1 CQM1H-MAB42 board at a time. The CQM1H-MAB42 analog I/O board supports flexible and accurate signal handling through its four analog inputs and two analog outputs. It supports input signal ranges of -10 to 10 Volts, 0 to 10 Volts, 0 to 5 Volts, and 0 to 20 milliamps, as well as output signal ranges of -10 to 10 Volts or 0 to 20 milliamps. All of the input and output points can support separate signal ranges. The CQM1H-MAB42 analog I/O board is designed to have small dimensions. Its width is 25 mm, its height is 110 mm, and its length is 107 mm. Because it weighs only about 100 g, it is simple to install in a variety of programmable controller systems. The CQM1H-MAB42 analog I/O board was designed to consume 400 mA of maximum current at 5 Volts DC from the power supply unit. This board features photocoupler isolation between its inputs and the programmable controller, but it does not feature any isolation between its inputs. The CQM1H-MAB42 analog I/O board has 2 LEDs on its front panel.