ATS22D75Q
Configured for 3-phase networks, this soft starter features a factory setting current rated at 69 amperes. It provides a control circuit voltage of 230 volts AC and operates within a network frequency
The Schneider Electric ALTISTART series consists of advanced soft starters engineered to provide controlled acceleration and deceleration of three-phase asynchronous motors. By gradually applying voltage, these devices minimize mechanical stress, reduce electrical peaks, and extend the operational life of motors and connected equipment. Designed for versatility, the series supports a broad range of applications such as pumps, fans, conveyors, and compressors. Models like the Altistart 01, 22, and 48 cater to different industrial requirements, from compact machinery to heavy-duty operations, offering features such as torque control, integrated bypass, thermal protection, and motor diagnostics.
Browse available units in our catalog of ALTISTART.
Configured for 3-phase networks, this soft starter features a factory setting current rated at 69 amperes. It provides a control circuit voltage of 230 volts AC and operates within a network frequency
This soft starter connects directly in the motor supply line and allows for up to 5 discrete inputs with a minimum switching current of 10 mA for 6 V DC relay outputs. Equipped with an RJ45 connector,
This soft starter features an operating frequency range from 50 Hz to 60 Hz. With built-in Modbus communication, it facilitates integration into various control systems. The unit includes five discret
This soft starter is rated for a maximum current of 6 Amperes and is suitable for motors ranging from 2 to 3 horsepower. The ATS01N206RT can function within ambient temperatures of -10°C to 50°C. Addi
This soft starter supports motor power ratings for configurations including 3-phase and single-phase setups, allowing for operation at several power levels. Notably, it features an integrated bypass f
This soft starter supports motor operations with a maximum horsepower rating of 75 HP while ensuring compliance with IEC 60947-4-2 standards. Designed for input voltage handling between 208 V to 690 V
This soft starter operates within a supply voltage range of 230 to 440 volts, with a factory current setting rated at 28.5 Amps. Power dissipation is measured at 44 watts. Designed for torque control
This motor soft starter supports three-phase electrical systems, with a preconfigured current rating of 240 A. It operates using a torque-controlled activation method that limits current to 3.5 times
This soft starter is engineered to handle motor power ratings between 5.5 and 15 kilowatts. It features five discrete inputs and two discrete outputs, and it interfaces through an RS-485 multidrop phy
This soft starter provides robust performance with an output current capacity of 210 A. Suitable for environments where temperatures range from -10 to 40°C without derating, it can handle temperatures