Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Siemens SIMOVERT MASTERDRIVES 6SE7021-8TP50

Product image is representative; revision or series may vary. Contact us to request a specific version.

6SE7021-8TP50

|
Need a Specific Revision?

The Siemens 6SE7021-8TP50 is a motion control drive inverter unit suitable for various industrial applications. It supports input voltage ratings from 510 to 650 volts DC, and has a nominal power rating of 7.5 kilowatts, contributing to an impressive horsepower capacity of 10.1.

Out of stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more

Technical specifications for 6SE7021-8TP50

ManufacturerSiemens
Product TypeMotion Control Drive Inverter Unit
Product LineSIMOVERT MASTERDRIVES
Part Number6SE7021-8TP50
UPC662643062373
Weight19.56 lbs (8.87 kg)
SeriesAC Drives
Input Voltage Rating510 to 650 Volts DC
Nominal Power Rating7.5 kilowatts
Horsepower Capacity10.1 horsepower
Rated Output Current17.5 Amperes
Short-Time Current52.5 Amperes
Power Supply Voltage380 to 480 Volts AC
Input Frequency50 to 60 Hertz
Rated Phase3-phase
Output Frequency0 to 400 Hertz
Total Power Loss0.3 kilowatts at 5 kilohertz
Maximum Cable Length50 to 140 meters (shielded cables) or 70 to 100 meters (unshielded cables), at frequency ranges of 5 to 10 kilohertz
Protection RatingIP20
Request a Repair

The 6SE7021-8TP50 model from Siemens serves as an effective motion control drive inverter unit. This unit accepts input voltage levels spanning from 510 to 650 volts DC, while delivering a nominal power output of 7.5 kW. It can also achieve a horse power capacity of 10.1.

With regard to operational specifications, the rated output current reaches 17.5 amperes, while it can manage short-time current loads of 52.5 amperes. This inverter requires a power supply of 380 to 480 volts AC and operates efficiently across an input frequency range of 50 to 60 Hz. The rated phase configuration for this device is 3-phase, and it can produce an output frequency between 0 and 400 Hz, allowing for flexible control of motors.

In terms of physical dimensions, the inverter measures 14.2 inches (360 mm) in height, 15.3 inches (135 mm) in width, and 10.2 inches (260 mm) in depth. The unit has a weight of 19.62 pounds (8.9 kilograms), making it manageable for installation. During operation, the total power loss is rated at 0.3 kW when functioning at 5 kHz.

For installation needs, the maximum cable length supported ranges between 50 to 140 meters for shielded cables, and 70 to 100 meters for unshielded cables, especially in the frequency range of 5 to 10 kHz. Additionally, the inverter conforms to a protection rating of IP20, providing adequate safety against access to hazardous parts.