Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Siemens SINAMICS S120 6SL3055-0AA00-5CA2

Product image is representative; revision or series may vary. Contact us to request a specific version.

6SL3055-0AA00-5CA2

|
Need a Specific Revision?

The Siemens 6SL3055-0AA00-5CA2, belonging to the SINAMICS S120 series, is a sensor module designed for efficient encoder integration. This module has the ability to handle a range of incremental encoders (TTL/HTL) and SSI encoders, offering a maximum encoder frequency of up to 500 kHz with an absolute position resolution of 30 bits for SSI devices.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more

Technical specifications for 6SL3055-0AA00-5CA2

ManufacturerSiemens
Product TypeSensor Module
Product LineSINAMICS S120
Part Number6SL3055-0AA00-5CA2
UPC662643432688
Weight0.44 lbs (0.20 kg)
Encoder CompatibilitySupports incremental encoders (TTL/HTL) and SSI encoders
Maximum Encoder FrequencyUp to 500 kHz
SSI Baud Rate100 to 1000 kBaud
ResolutionAbsolute position resolution of 30 bits for SSI encoders
Power Supply24 V DC with a power draw of 0.20 A
Sensor SupplyProvides 0.35 A at 5 V DC and 35 V DC for onboard position encoder interface
Maximum Line Length100 m for incremental encoder TTL and unipolar HTL, 300 m for bipolar HTL, 100 m for absolute encoder SSI
Degree of ProtectionIP20 / UL open type
Power LossMax. of 10.0 W
Conductor Cross-SectionLine side supports up to 2.5 mm² (AWG 14)
Onboard Position Encoder InterfaceEquipped with M4 screw PE conductor
Compliance StandardsMeets cULus standards
Request a Repair

The Siemens part number 6SL3055-0AA00-5CA2 is categorized as a sensor module within the SINAMICS S120 series. This unit is capable of supporting both incremental encoders, including TTL and HTL types, as well as SSI encoders. It is engineered to operate efficiently up to a maximum encoder frequency of 500 kHz and provides a high-resolution output with 30 bits of absolute position resolution for SSI encoders.

The power requirements for the module consist of a 24 V DC supply with a draw of 0.20 A. For the sensor supply, it delivers 0.35 A at 5 V DC and 35 V DC, specifically for the onboard position encoder interface. It accommodates length specifications for encoder connections, allowing for a maximum line length of 100 meters for incremental encoders using TTL or unipolar HTL and up to 300 meters for bipolar HTL. Additionally, for absolute encoders utilizing SSI, the length can reach 100 meters as well.

Constructed with an IP20 protection rating, this sensor module is identified as UL open type, ensuring adequate protection in managed environmental conditions. The dimensions of the module are 30 mm in width, 150 mm in height, and 111 mm in depth, with a total weight of approximately 0.45 kg (0.99 lb). The device experiences a power loss of no more than 10 watts during operation. For line connections, it supports conductors with a cross-section of up to 2.5 mm² (AWG 14). The onboard position encoder interface is fitted with an M4 screw PE conductor, and this module conforms to the standards set by cULus for safety and compliance.