Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Siemens SITOP 6EP3436-8SB00-0AY0

Product image is representative; revision or series may vary. Contact us to request a specific version.

6EP3436-8SB00-0AY0

|
Need a Specific Revision?

The Siemens 6EP3436-8SB00-0AY0 is a three-phase power supply unit within the SITOP series. It is designed to provide reliable DC output voltage at 24 volts, featuring a maximum supply voltage range of 500 volts and a minimum of 400 volts. This unit has a buffering capability of 15 milliseconds, ensuring stable performance during power fluctuations.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more

Technical specifications for 6EP3436-8SB00-0AY0

ManufacturerSiemens
Product LineSITOP
Part Number6EP3436-8SB00-0AY0
UPC887621882709
Weight1.00 lbs (0.45 kg)
ProductPower Supply Unit
Number of Phases3
Minimum Supply Voltage400 V
Maximum Supply Voltage500 V
Buffering Time15 ms
Line Frequency50/60 Hz
Input Current1.2 A
Current Limitation16 A
Output Voltage24 V
Output Voltage TypeDC
Residual Ripple100 mV
Voltage Peak200 mV
Display VersionGreen LED
Response Delay Time2.5 s
Power Loss31 W
Request a Repair

The Siemens part number 6EP3436-8SB00-0AY0 serves as a dependable power supply unit within the SITOP series. This device supports three-phase operation, achieving a voltage range from 400 to 500 volts for its supply. Operating efficiently at a line frequency of either 50 or 60 hertz, it delivers a consistent DC output voltage of 24 volts.

This power supply is built to manage electrical transients effectively, with a buffering time of 15 milliseconds that allows it to maintain output stability during brief interruptions. Its input current is rated at 1.2 amps, ensuring adequate energy flow to the device, while the maximum current limitation is set at 16 amps, safeguarding against overload conditions.

The output characteristics of this unit include a residual ripple voltage of 100 mV, indicating minimal fluctuations in output, and a voltage peak measurement capped at 200 mV. A green LED display enhances visibility, providing status indications to operators. The response delay time is recorded at 2.5 seconds, which denotes the period taken to react to changes in supply conditions. The unit experiences a power loss amounting to 31 watts during operation, reflecting its efficiency in energy management.