- Dead displays
- Local/remote port failures
- Main control board failures
- I/O Failures
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley PowerFlex 700 Repair
We offer extensive repairs for your PowerFlex 700. We keep many spare parts in stock so that we can repair your PowerFlex 700 as efficiently and effectively as possible. Our standard repair lead time is 2-4 weeks. However, we can often repair your unit much faster if necessary. We can repair most issues with your PowerFlex 700 and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your PowerFlex 700 parts.
- Power control board failures
- SCR/IGBT failures
- Faulty fans
- Heatsink sensor faults
- DC bus failures
- Precharge failures
- Undervoltage
- Overvoltage
- Broken Plastic Covers
- Missing Covers
- Missing Terminals
- Broken mounting attachments/corners
Browse PowerFlex 700 Repairs
Browse our catalog of repairable PowerFlex 700 parts to get a quote.
20BD011A3AYYADD1
This unit features a continuous output current of 11 A and has an input current rating of 9.5 A. The adjustable outputs can vary from 0 to 460 V AC. With an overload capacity of 12.1 A for one minute,
In Stock Ships Today
20BD011A3AYYADN0
This drive supports an input frequency of 60 Hz and operates with an efficiency of approximately 97.5%. It features an enclosed design rated at IP20/NEMA 1. The braking system incorporates a built-in
In Stock Ships Today
20BD011A3AYYAEA0
This drive operates on a 480 V AC 3-phase input at a frequency of 60 Hz. It provides an output current of 11 A and supports both V/Hz and sensorless vector control modes. The unit features an IP20 / T
In Stock Ships Today
20BD011A3AYYAEB0
This model supports a maximum frequency of 400 Hz and provides a voltage range of 342 to 528 volts AC. It is capable of delivering an output current of 11 amperes while supporting motors rated up to 7
In Stock Ships Today
20BD011A3AYYAEC0
This device features a short-circuit rating of 200 kA symmetric. It provides a comprehensive I/O set with 2 analog inputs (AI), 2 analog outputs (AO), 6 digital inputs (DI), and 3 digital outputs (DO)
In Stock Ships Today
20BD011A3AYYAEC1
This model operates within an ambient temperature range of 0°C to 40°C and supports up to 80% operating humidity (non-condensing). It features an installed brake IGBT and a drive-mounted brake resisto
In Stock Ships Today
20BD011A3AYYAED0
This drive operates with a rated frequency of 60 Hz and accommodates 3-phase power input. It is housed in an IP20-rated enclosure for protection and includes an installed brake IGBT as well as a drive
In Stock Ships Today
20BD011A3AYYAED1
This drive features a rated current of 11.0 A and operates on a 3-phase power supply. Its temperature ratings range from a minimum of 0°C to a maximum of 40°C. Additionally, it supports an operating h
In Stock Ships Today
20BD011A3AYYAEN0
This adjustable frequency drive operates at a rated frequency of 60 Hz and comes with a drive-mounted brake resistor. Specified for use in environments with temperatures ranging from 0°C to 40°C, it i
In Stock Ships Today
20BD011A3AYYANA0
This drive model has a rated current of 11.0 amperes and functions within a temperature range from 0°C to 40°C. It operates at a frequency of 60 Hz and comes equipped with an installed drive mounted b
In Stock Ships Today
Showing 351-360 of
5,041
results
About PowerFlex 700
The Allen-Bradley PowerFlex 700 AC drives are equipped with 3-phase motor control capabilities for variable or constant torque applications and they provide application-specific parameters for oil wells, positioning, lifting, as well as fan and pump applications. PowerFlex 700 drives offer high torque performance through vector control with FORCE Technology and they are optimized for power saving through the adjustable voltage control functions. These drives are available in power ratings of 0.3 to 75 kilowatts at 200 to 240 Volts AC, 0.37 to 500 kilowatts at 380 to 480 Volts, 0.75 to 110 kilowatts at 500 to 600 Volts AC, and 45 to 135 kilowatts at 690 Volts AC.
The PowerFlex 700 series drives offer position indexing as well as position and speed profiling. Their application sets for oil wells include pump jack and pump off functions while they use TorqProve technology for lifting. Optional incremental encoders are available for this series and the enclosure options are IP 00, NEMA Open, Flange, NEMA Type 1, IP 20, and NEMA/UL Type Open enclosures. The I/O options are 6 digital inputs, 1 PTC input, 2 bipolar analog outputs, 3 relay inputs, and 2 bipolar analog outputs. Each PowerFlex 700 drive is fitted out with either a ControlNet, EtherNet/IP, ControlNet, or a DeviceNet communication module. They support Logix integration with add-on profiles in the Studio 5000 Logix designer software. LCD human-machine interface modules are available on PowerFlex 700 drives to offer fast and easy parameter identification, system monitoring, and local drive programming. The automatic drive replacement support reduces configuration time.