- Dead displays
- Local/remote port failures
- Main control board failures
- I/O Failures
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley SMC-3 Repair
We offer extensive repairs for your SMC-3. We keep many spare parts in stock so that we can repair your SMC-3 as efficiently and effectively as possible. Our standard repair lead time is 2-4 weeks. However, we can often repair your unit much faster if necessary. We can repair most issues with your SMC-3 and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your SMC-3 parts.
- Power control board failures
- SCR/IGBT failures
- Faulty fans
- Heatsink sensor faults
- DC bus failures
- Precharge failures
- Undervoltage
- Overvoltage
- Broken Plastic Covers
- Missing Covers
- Missing Terminals
- Broken mounting attachments/corners
Browse SMC-3 Repairs
Browse our catalog of repairable SMC-3 parts to get a quote.
150-C9NCD
This motor controller by Allen Bradley operates efficiently under a rated line voltage ranging from 200 to 600 volts AC. It has a continuous heat dissipation capacity of 12 watts. Rated for 9 amperes,
Call
150-C9NCR
This solid-state motor controller features a peak voltage capacity of 1,600 Volts AC and insulation rated at 600 Volts AC. It utilizes an electromagnetic relay for control circuit operation and is des
Available
150-CA10
This auxiliary contact block is part of the SMC-3 series and is designed to enhance functionality with SMC-3 controllers. It offers side mounting and has a total of one pole, with one normally open co
In Stock Ships Today
150-CA20
This auxiliary contact block features a 2-pole design with two normally open contacts and no normally closed contacts. It supports side mounting and facilitates sequence terminal designations. The ope
In Stock Ships Today
150-D64NBD
This device is suited for various motor control applications, providing power ratings of 18.5 kW at 230 VAC and 30 kW at 380/400/415 VAC. It operates at a frequency of 50 Hz, with an operating tempera
Available
150-F84L
The 150-F84L is engineered for both line and load side protection. It supports current ratings ranging from 108 to 1250 Amps when used with SMC-Flex controllers. For SMC-50 controllers, its ratings sp
In Stock Ships Today
152H-C85FBD-47
This SMC-3 controller is rated for operation at a minimum frequency of 50 Hz and a maximum frequency of 60 Hz. It comes in a robust NEMA 4/12 enclosure with an IP65 protection rating, designed for ins
Call
Showing 131-137 of
137
results
About SMC-3
The SMC-3 product series is part of the bigger 150 series by Allen-Bradley/Rockwell Automation. The series offers smart motor controllers that are actually soft starters based on microprocessor technology. The SMC-3 controllers are intended for use with 3-phase motors to increase efficiency through better control of the starts and stops. These devices can be incorporated into a variety of systems to meet the requirements of different applications. The SMC-3 devices have compact designs and their setup process is secure and easy. Some of the advantages of the SMC-3 controllers are integrated bypasses, reduced downtime, motor overload protection, and advanced diagnostics capabilities. These controllers have 5 modes for starting and stopping, including the soft start, kickstart, current limit, coast-to-rest, and soft stop. Also, it should be mentioned that the controllers from the SMC-3 series are CE marked and CSA certified. The controllers comply with standards like the UL 508, CSA C22.2 (no.14), and the EN/IEC 60947-1/60947-4-2 standards.
The SMC-3 controllers are made for input voltage ranges from 200 to 690 Volts and their current ranges from 1 to 480 Amps. These controllers have open types of enclosures and control voltage ratings of 100 to 240 Volts AC or 24 Volts AC/DC. Allen-Bradley/Rockwell Automation provides a variety of different models that generate power in a range from 0.75 to 900 Horsepower (1.5 to 560 kilowatts). The operating frequency range of these controllers is 50 to 60 Hertz and their rated impulse voltage is 6 kilovolts. The SMC-3 series offers a choice of accessories such as replacement fans, connecting modules, protective modules, auxiliary contact blocks, and terminal lug kits. These motor controllers operate in a temperature range of -50 to 50 degrees Celsius (23 to 122 degrees Fahrenheit) and at altitudes of up to 2000 meters (6560 feet). In addition to this, their enclosures provide IP 2X protection ratings. Also, the SMC-3 series controllers have a solid rating in regard to resistance to vibration and shock.