- Bad communication ports
- Broken selector/key switches
- Dead batteries/Bad Battery connections
- Solid or Blinking RED OK Status Light
- Solid or Blinking RED RUN Status Light
- Solid or Blinking RED Fault Status Light
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley ArmorStart Repair
We offer extensive repairs for your ArmorStart. We keep many spare parts in stock so that we can repair your ArmorStart as efficiently and effectively as possible. Our standard repair lead time is 3-5 days. However, we can often repair your unit much faster if necessary. We can repair most issues and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your ArmorStart parts.
- Bad analog inputs or ouptus
- Bad digital input or outputs
- Bad relays (stuck on/off)
- Incorrect voltages on inputs or outputs
- Incorrect current on inputs or outputs
- DF1, DH-485, DH+, Profibus, Remote I/ (RIO) failures and more!
- Intermittent communication
- Solid RED/Blinkging RED communication lights
- Devicenet, Ethernet, ControlNet, RS232 ports.
- Missing CJC Jumpers
- Incorrect readings
- Failed inputs
- Dead power supplies
- Incorrect voltage
- Broken Plastic
- Poor Connections
- Bad Slots
Browse ArmorStart Repairs
Browse our catalog of repairable ArmorStart parts to get a quote.
280A-F12Z-10A-CRW-3-SM
This motor controller encompasses a rated device current of 10A and is categorized under the full voltage starter ArmorPoint type. It is specifically designed to be wall or panel mounted and has an en
Available
280D-F12B-10C-CR-3
Designed for wash-down environments, this ArmorStart starter features an IP67 rating and NEMA Type 4 enclosure. It has a rated operational current of 5.5 A and withstands a rated impulse voltage of 6
Available
280D-F12Z-10A-RRW-3
This unit features four digital inputs and two digital outputs for enhanced control functionality. It is housed in an enclosure rated at IP67, ensuring protection against dust and water. With a NEMA 4
Available
280D-F12Z-10B-RRW-3
This full-voltage starter utilizes DeviceNet for communication, featuring baud rates of 500 kbps. The unit requires a rated operating voltage of 24V DC with a device input current of 364 mA at 11V DC.
Available
280D-F12Z-10C-CR
This distributed motor controller operates within an input voltage range of 200 to 575 volts AC and supports 3-phase applications. The controller has a control voltage of 24 VDC and features an IP67 r
Available
280D-F12Z-10C-RRW-3
This full-voltage starter operates at a rated voltage of 24 VDC and communicates via DeviceNet protocol. It includes a maximum operating altitude of 1000 meters and features an IP67 rating, ensuring p
Available
280E-F12Z-10A-RR
This full voltage starter operates at a control voltage of 24 V DC, suitable for panel or wall mounting. It features overload protection through an adjustable thermal relay and can accommodate a curre
Available
280E-F12Z-10C-RRW-3
This device operates within a current range of 1.1 to 5.5 A and incorporates adjustable thermal relay overload protection. The starter is designed for 3-phase systems and features an IP67/NEMA 4 water
Available
280E-F23Z-25D-CRW-3
This full voltage starter supports a rated current of 25 A and is suitable for mounting on panels or walls. Its current range spans from 3.2 to 16 A, while the enclosure is rated NEMA 1/IP20, making i
In Stock Ships Today
280E-FN-10-R
This unit operates under a communication protocol of EtherNet/IP and carries a maximum rated device current of 10 A. It features an IP67/NEMA 4 enclosure rating, ensuring robust protection against env
Available
Showing 11-20 of
96
results