- Bad communication ports
- Broken selector/key switches
- Dead batteries/Bad Battery connections
- Solid or Blinking RED OK Status Light
- Solid or Blinking RED RUN Status Light
- Solid or Blinking RED Fault Status Light
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley IEC 100 Contactors Repair
We offer extensive repairs for your IEC 100 Contactors. We keep many spare parts in stock so that we can repair your IEC 100 Contactors as efficiently and effectively as possible. Our standard repair lead time is 3-5 days. However, we can often repair your unit much faster if necessary. We can repair most issues and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your IEC 100 Contactors parts.
- Bad analog inputs or ouptus
- Bad digital input or outputs
- Bad relays (stuck on/off)
- Incorrect voltages on inputs or outputs
- Incorrect current on inputs or outputs
- DF1, DH-485, DH+, Profibus, Remote I/ (RIO) failures and more!
- Intermittent communication
- Solid RED/Blinkging RED communication lights
- Devicenet, Ethernet, ControlNet, RS232 ports.
- Missing CJC Jumpers
- Incorrect readings
- Failed inputs
- Dead power supplies
- Incorrect voltage
- Broken Plastic
- Poor Connections
- Bad Slots
Browse IEC 100 Contactors Repairs
Browse our catalog of repairable IEC 100 Contactors parts to get a quote.
100-C60UD10
This IEC contactor supports a coil voltage of 110 to 120 V AC and operates efficiently within frequency ratings of 50 to 60 Hz. It has screw terminal connections and is suitable for conductor sizes ra
In Stock Ships Today
100-C72*00
This contactor can handle up to 72 Amps in AC-3 applications and 100 Amps in AC-1 applications at a temperature of 40 degrees Celsius. It supports reversible coil terminals and can be mounted on a 35-
Call
100-C72B00
Rated for 72 amperes, this contactor operates effectively within a voltage range of 440 VAC at 50 Hz and 480 VAC at 60 Hz. It features screw terminals for electrical connections and is designed for us
Available
100-C72D00
This contactor features screw terminals and lacks auxiliary contacts. It is designed for line-side termination, ensuring straightforward wiring. Its operating temperature is between -40 and 60 degrees
In Stock Ships Today
100-C72D01
This contactor is rated for an input coil voltage of 110V at 50Hz or 120V at 60Hz. It is suitable for mounting on DIN rail or base and operates within a frequency range of 50 to 60 Hz. Designed with t
In Stock Ships Today
100-C72D10
This contactor has a rated voltage of 120 VAC and is specified with one normally open (NO) contact and no normally closed (NC) contacts. The unit is non-enclosed, facilitating easier integration into
In Stock Ships Today
100-C72D11
This contactor features three poles and comprises both one normally open (N.O.) and one normally closed (N.C.) contact. It operates with a coil voltage of 110 V at 50 Hz and 120 V at 60 Hz. The produc
In Stock Ships Today
100-C72DJ00
This contactor operates with three main poles featuring a configuration of 3 NO contacts. A conventional coil with an integrated diode operates at 24 VDC. The device meets IP20 protection standards an
In Stock Ships Today
100-C72DJ01
This IEC contactor features a maximum operational current rating of 100 A for AC-1 applications. It includes one normally closed auxiliary contact and does not have any normally open contacts. The coi
In Stock Ships Today
100-C72KD01
This IEC contactor features three main poles and three normally open (N.O.) contacts, along with a single normally closed (N.C.) auxiliary contact. It is rated for operating frequencies between 50 and
Available
Showing 141-150 of
783
results