- Bad communication ports
- Broken selector/key switches
- Dead batteries/Bad Battery connections
- Solid or Blinking RED OK Status Light
- Solid or Blinking RED RUN Status Light
- Solid or Blinking RED Fault Status Light
Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley RightSight Photoelectric Sensors Repair
We offer extensive repairs for your RightSight Photoelectric Sensors. We keep many spare parts in stock so that we can repair your RightSight Photoelectric Sensors as efficiently and effectively as possible. Our standard repair lead time is 3-5 days. However, we can often repair your unit much faster if necessary. We can repair most issues and if for some reason we cannot repair your unit we will do our best to offer a refurbished unit at the repair cost, so that you can get a working unit back as soon as possible!
- 2 Year DO Supply Warranty
- Fast repairs at low costs
- No surprises or up-charges for difficult repairs
- Standard lead time of 2-4 weeks
- Extensive quality control and testing
Get a repair quote
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Hardware issues & error codes we repair
We repair all of the following hardware issues and error codes with your RightSight Photoelectric Sensors parts.
- Bad analog inputs or ouptus
- Bad digital input or outputs
- Bad relays (stuck on/off)
- Incorrect voltages on inputs or outputs
- Incorrect current on inputs or outputs
- DF1, DH-485, DH+, Profibus, Remote I/ (RIO) failures and more!
- Intermittent communication
- Solid RED/Blinkging RED communication lights
- Devicenet, Ethernet, ControlNet, RS232 ports.
- Missing CJC Jumpers
- Incorrect readings
- Failed inputs
- Dead power supplies
- Incorrect voltage
- Broken Plastic
- Poor Connections
- Bad Slots
Browse RightSight Photoelectric Sensors Repairs
Browse our catalog of repairable RightSight Photoelectric Sensors parts to get a quote.
42EF-E1EZB-F4
The 42EF-E1EZB-F4 Transmitted Beam Photoelectric Sensor is a product of Allen Bradley/Rockwell Automation. It features an acrylic lens, 4-pin DC Micro connector, and an operational voltage of 10.8 to
Available
42EF-G1MPA-Y4
The photoelectric sensor operates at a control supply voltage of 10.8 VDC and has a PNP switching output type. It includes a sensitivity adjustment knob for configuration and is connected via a 4-pin
Call
42EF-P2JBB-F4
This model operates with sensing distances from 0.025 to 3 meters and is equipped with both NPN and PNP output types. It utilizes a visible red light source and achieves a rapid response time of 1 ms.
Available
42EF-P2MPB-F4
This photoelectric sensor is capable of sensing distances up to 3000 mm and has a narrow beam angle of 1.5 degrees. It operates in both light and dark switching modes and provides a PNP output. The su
Available
42EF-P2MPB-Y4
This model functions with both light output (L.O.) and dark output (D.O.) configurations using a PNP output. It is designed for operation in environments with humidity levels from 5% to 95% and can wi
In Stock Ships Tomorrow
42EF-P8JBC-F4
With an IP54 rating, this photoelectric sensor is designed to withstand moderate environmental conditions. The spot size measures 16 x 20 mm, and sensitivity can be adjusted easily using a teach butto
Call
42EF-S1MPA-Y4
This photoelectric sensor operates with a PNP output type and offers selectable light or dark operating modes. The device features a manual sensitivity adjustment and utilizes a 4-pin Pico QD connecti
Call
Showing 1-7 of
7
results