1994 results
This module features six input capacities and functions efficiently at a nominal voltage of 115V AC. It boasts 16 KB of register memory and 64 KB of logic memory. Additionally, it supports ribbon cables for connection to an arithmetic module and operates in temperature ranges from 0 to 60 degrees Ce
Designed for adaptability, the IC600CP610 CPU module features 8 slots for enhanced connectivity. It can handle up to 16,000 inputs and outputs when utilized in expanded I/O mode, making it suitable for complex control systems. Operating within a temperature range of 0°C to 60°C outside the rack, it
Designed for use with Series One PLCs, this hand-held programmer features an LCD display and an alphanumeric keypad. It allows for online programming and monitoring, supporting ladder logic programming and memory function for both RAM and EEPROM. It connects to the PLC through a 5 ft integral cable.
The GE Fanuc IC660EBA021 Genius I/O Block Electronics Assembly is for the Genius I/O RTD (Resistive Temperature Detector) input block known as the IC66BBA021 Input Block. This I/O block has 6 analog inputs, 18 to 56 Volts DC of operating voltage, 7 Watts of power rating, and a group isolation rating
This module permits connection to a maximum of three base units, and the overall system can support up to 400 I/O points. Capable of functioning within a temperature range of 0 to 55°C, it also tolerates relative humidity levels from 5 to 95% without condensation. With a maximum installation altitud
This network adapter module features dual RJ-45 copper ports and can handle an I/O data size of 2048 bytes for both input and output. It boasts a transfer speed of 100 MB/s and supports diagnostic features. The maximum bus length varies, reaching between 100 meters and 1.2 kilometers, depending on t
Featuring an impressive resolution of 12 bits, the ST-3118 module performs at an update rate of 4 milliseconds per input. With its 120 Ohm input impedance, it integrates seamlessly into numerous systems. The input module consumes a maximum of 60 mA at 5V DC and connects through spring clamps on a te
This GE Fanuc Emerson power supply module facilitates bus expansion and maintains a maximum load current of 10 amps per point. It is not designed as a smart module and features LEDs for status indication. The internal power draw at 5 volts DC is rated at 1 amp. It is designed with spring clamp termi
This GE Fanuc Emerson output module is structured with two output groups, accommodating up to 7 units of load at 5V and 10 units of load at both +12V and -12V. It includes LED indicators for output status updates and supports Darlington amplifier configurations for enhanced performance.
Within the ST-222F module, each output manages a digital signal voltage of 24V DC. It allows for a total of 16 output channels, making it efficient for various applications. The module exhibits a rapid response time of 0.3 milliseconds when switching from ON to OFF and vice versa, ensuring effective
This module integrates effectively with the VersaMax Micro system. User power for connected sensors can reach up to 200 mA. It accommodates a power supply voltage of 120/240 VAC and can handle resistive relay loads up to 2 A at 240 VAC or 24 VDC. Compact dimensions of 150 x 90 x 76 mm facilitate str
The GE Fanuc motion controller known as the IC693DSM302 motion controller is part of GE Series 90-30 and it provides additional capabilities for programmable logic controllers (PLCs). The unit comes with 2 axes and a serial port for firmware updates.