1994 results
Designed for performance, the IC655PWR501 power supply features a leftmost installation slot on the base unit and configurable jumper options for voltage selection. Located in the lower right area of the module, the terminal block comprises eight terminals that support various functions, including R
This communication module operates effectively within a temperature range of 0 to 60 degrees Celsius and can be stored safely at temperatures up to 70 degrees Celsius. It includes 6 LED indicators for status monitoring and provides isolation protection of 1,500 volts between ports. The unit is compa
This input module is accurate within ±1.3 °C and features a resolution of 13 bits. Cold junction compensation and open thermocouple detection are included. Users can adjust the sample rate via jumpers, and the module maintains a normal mode rejection of 86 dB at line frequencies. Calibration should
The GE Fanuc IC697BEM741 FIP Bus controller for the Series 90-70 FIP Bus controller system. This module is installed in a single slot of the GE IC697 PLC VME integrator rack, and it has draws 1.3 Amps of backplane current at 5 Volts DC.
This expansion base incorporates 36 box style terminals for effective wiring. It supports panel mounting or installation on DIN rails and operates in temperatures ranging from 0°C to 60°C. It can be stored in environments as cold as -40°C and up to 85°C while maintaining a relative humidity level of
This output module is dedicated to output operations and is designed to occupy a single slot in a control system. Operating temperatures are specified at 0 to 60°C outside the rack, with a storage range of -20 to 80°C. It requires a maximum power supply of 5V DC at 400mA from the rack, while a user-
The IC697ALG444 functions as an analog input expansion module, presenting 16 channels that allow for flexibility in data acquisition. It supports a voltage range of -10 to +10 volts and a current range of 4 to 20 mA. With a bit resolution of 14, it is compatible with Series 90-70 and RX7i backplanes
The IC660TBA105 terminal assembly is made by GE Fanuc and it has 6 current-source outputs. The assembly has an intended voltage of 115 Volts AC or 125 Volts DC and a power supply voltage range of 93 to 132 Volts AC or 105 to 145 Volts DC.
The GE Fanuc IC200MDL143 Discrete Input Module is made for the Versamax I/O and control system. This module has 8 individually-isolated inputs with 120 Volts AC of operating voltage and 50 milliamps of maximum backplane current consumption.
This GE Fanuc Emerson bus controller supports Genius I/O blocks and enables normal status updates. It requires only 1 byte (or 8 references) of input addresses to relay its status to the central processing unit (CPU). The bus controller operates within an input load of 20 units at 5V and 2 units at
The Field Control IC670FBI001 I/O base has a nominal rated voltage of 115 Volts AC and 125 Volts DC, along with an input frequency range of 47 to 63 Hertz. The base unit is manufactured by GE Fanuc and it consumes 48 Volt-Amps of power at 115 Volts AC and 24 Watts of power at 125 Volts AC.
This I/O expansion cable measures 25 feet in length and is equipped with both male and female terminal connectors. Its primary role is to facilitate connections between local stations and CPU stations, as well as among local stations. The cable is shielded and has a black jacket for added durability