1994 results
This terminal assembly supports various configurations for input filter time, RTD resistance settings, and alarm thresholds. It is designed to detect faults, open wires, and shorts, ensuring reliable operation. Additionally, it allows for programming controller and handheld monitor connections, oper
The GE Fanuc IC660BRD025 Genius Modular Redundancy Sinking Output Block is made for the Genius I/O modular redundancy output subsystem. This output block has 32 output points, built-in blocking diodes and feedback resistors on each output point, and an operating voltage range of 5 to 48 Volts DC.
The GE Fanuc Automation IC694MDL730 output module has one group of 8 outputs. it operates with a voltage of 12 to 24 Volts DC.
As a component of the PACSystems RSTi series, the ST-3428 provides eight channels of analog input with a voltage range of 0-10V DC. It features a quick update speed of 4 mS, an internal power load capacity of 60 mA at 5V DC, and an input impedance of 500K Ohms. This module's compact dimensions measu
This expansion module is geared towards enhancing the VersaMax microcontroller. It provides eight input points, each operating at 24VDC. The device is rated at 4 watts for the input power supply and provides a user power output of 200 mA to supply connected sensors. It can accommodate up to four exp
This analog input module features up to four inputs, each supporting 4 points per common. It has an input voltage range of 0 to 10 V DC and an input impedance of 500K Ohms. The module has diagnostic capabilities that allow for a response time of 4 milliseconds across all channels.
The IC670MDL644 DC Positive/Negative Field Control Logic Input Module is a 16-point grouped input module from GE Fanuc. It has 24 Volts DC of rated voltage, 0 to 30 Volts DC of input voltage, 8 milliamps of user input current at 24 Volts DC, and 16 inputs.
This output module accommodates four output points, each capable of providing up to 0.5 A at 24 V DC, with a response time of 0.3 milliseconds. The device operates with a current consumption of 45 mA at 5 V DC and supports installation on a 35mm DIN rail. Additionally, it features an I/O connector f
This output module provides four sink outputs, operating at a nominal voltage of 24 VDC. It supports a maximum current of 2 A and has a peak voltage rating of 45 VDC. Response times for switching between ON and OFF states are as quick as 0.1 ms. Additionally, the logic side includes a circuit indica
The IC697MDL752 module is a GE Fanuc module that has 32 output points. The unit is part of GE Series 90-70 and it has a rated voltage of 12 Volts DC. The output voltage range of the module is 10 to 15 Volts DC and the output currents are 0.5 Amps and 2 Amps per point and per group, respectively.
This isolated I/O block features a total of 8 circuits and operates at a minimum frequency of 50 Hz and a maximum frequency of 60 Hz. The isolation between blocks is rated at 1500 V, ensuring robust performance in demanding environments. The unit can handle an output current of 2.0 A, making it suit
