971 results
This valve operates with a size of 1-1/2 inches and comes with threaded NPT end connections. It has a control port Cv rating of 29.2, allowing for effective flow control. The VA9208-GGC-3 spring-return actuator ensures proportional modulating control at a voltage of 24 VAC. Designed to operate in fl
Weighing 44.5 lbs, this actuator supports a fail-safe mode utilizing a spring return mechanism. It features eight springs and is compatible with butterfly valves, making it suitable for various HVAC applications. The housing is made of die-cast aluminum and possesses a NEMA 4 rating, ensuring protec
This device is equipped for standard equal area distribution of sensors and can accommodate up to 128 sensors. It requires a power input of 24 Volts AC, with a maximum consumption of less than 10 VA. Communication capabilities include a 2-wire RS-485 bus and support for BACnet MS/TP and Modbus RTU p
This heat pump operates at 208/230 volts with a single-phase input and functions efficiently across a voltage frequency of 60 Hz. The unit requires a minimum circuit ampacity of 13.5 amps and supports a maximum overcurrent protection of 20 amps, factors critical for safe installation and operation.
This replacement sensing element is designed to be compatible with V43 series devices. The connector features a 1/4 inch SAE male flare, ensuring a secure fit for reliable connections. This component supports both HVAC and temperature control applications and exhibits a maximum water supply pressure
This electronic fan speed controller features a 60-inch capillary length and operates efficiently within a pressure range of 360 to 450 psig. It functions with control voltages of 24 VAC at a power consumption of 1 VA. Its current ratings are 8.0 A at 208/240 VAC, 6.9 A at 277 VAC, and 4.0 A at 480
This speed controller is designed for single-phase applications and features dual pressure transducers for enhanced monitoring capabilities. It operates efficiently across a wide temperature range from -40°C to 60°C and is equipped with three auxiliary fan control circuits. Additionally, the unit ut
This transducer can measure pressure in a range of 0 to 100 psid and supports a maximum line pressure of 350 psig. It is equipped with a 3-valve manifold fitting and outputs a signal between 4 mA to 20 mA. The unit is rated for temperatures spanning from -18°C to 80°C, ensuring adaptability for vari
This water regulating valve operates with a connection size of 1-1/4 inches NPT screw, and it weighs approximately 16.0 lbs. Its adjustment range for the opening point spans from 200 to 400 psi, with a factory-set opening point of 275 psi. Designed to handle a maximum working pressure of 630 psi, it
This linkage kit is intended as a spare part and is compatible with tandem M9000 actuators, as well as M9124 and M9220 actuator models. It features a stem length of 0.5 inches and a stroke length of 1 3/8 inches, allowing for direct mounting. With the M9124 actuators, it operates effectively between
This actuator weighs 2.5 lb and has an input voltage frequency of either 50 or 60 Hz. It is classified with an IP54 rating, indicating a strong resistance to dust and moisture. The actuator supports an operating temperature range from -18°C to 50°C and a storage temperature range extending from -30°
This assembly supports a flow capacity of 240 Cv and utilizes an ANSI Class 125-rated flat-faced flange for connection. The inherent flow characteristic is modified linear, ensuring smooth operation. Constructed from cast iron with a black lacquer finish, the valve's pneumatic actuator operates with