6702 results
Allen Bradley / PLCs / SLC 500
The 1747-L542 processor features a power requirement of 4 watts and supports maximum local system configurations of three chassis or a total of 30 slots. With a typical scan time of 0.9 milliseconds per K, it operates effectively within a temperature range of 0 to 60 degrees Celsius and withstands h
Allen Bradley / PLCs / CompactLogix
This output module includes an open-circuit protection feature and supports short-circuit conditions up to 21 mA. It operates with a fast conversion rate, allowing a maximum of 5 milliseconds for all channels. The module requires a bus current draw of 145 mA at 5V DC and 185 mA at 24V DC.
Allen Bradley / PLCs / Point I/O 1734
This module provides two outputs and operates as a digital to analog converter. Its outputs can handle resistive loads between 0 and 750 Ohms. It includes a logic side with multiple indicators for module and network status, as well as output status. The maximum POINTBus current supported is 75 mA at
Allen Bradley / PLCs / CompactLogix
This controller supports a total of 32 tasks and offers the ability to execute 1000 programs within each task. It features Ethernet network capability with support for DLR, linear, and traditional star topology configurations, further enhancing integration flexibility. Onboard, it provides 768 KB of
Allen Bradley / PLCs / MicroLogix 1200
This input module supports two differential unipolar inputs with a maximum operating altitude of 2000 meters. It operates within a temperature range of -20 to 65 degrees Celsius. Panel and DIN rail mounting options are available for installation.
Allen Bradley / PLCs / CompactLogix 5069
This safety input module features eight sinking inputs with an input voltage range of 18-32V DC. It has a nominal on-state voltage of 24V DC, with off-state voltage not exceeding 5 volts DC. Current ratings include a minimum on-state current of 1.8 mA and a maximum off-state current of 1.5 mA, makin
Allen Bradley / PLCs / Micro 850
This controller provides 28 inputs, including 12 high-speed inputs, and supports both solid and stranded wire configurations. It operates at an input voltage rating of 24V AC/DC and has a power consumption of 33 watts. The unit is compatible with Type 3 IEC inputs and utilizes copper conductors excl
Allen Bradley / PLCs / ControlLogix
This input module supports a voltage classification of 120V AC and functions effectively within a frequency range of 50 to 60 Hz. It requires a total backplane power of only 0.58 watts. Operating temperatures run from 0 to 60 degrees Celsius, and it fits into a single slot. The device features an op
Allen Bradley / PLCs / CompactLogix
This high-speed counter module features a maximum heat dissipation of 6.21 Watts and operates with reinforced insulation at a continuous isolation voltage of 75V. It has a compact design, requiring only 1 slot width, and supports both DIN rail and panel mounting options. The module can maintain powe
Allen Bradley / PLCs / CompactLogix
This controller operates with a bus current rating of 1 Amp at 5V DC and 710 mA at 24V DC. It accommodates expansion with two Bulletin 1769 CompactLogix I/O modules and features 512 KB of user memory. Compatible components include the 1769-BA battery, 1769-ECR end cap, and 1769-RDQB door.