1994 results
As a flash memory board within the VersaMax Micro series, the IC200UMB001 seamlessly integrates with Micro 20, Micro 40, and Micro 64 PLC models. It can accommodate a capacity of 128 KB within compatible Micro 64 PLCs and receives power via Port 2 on the Micro PLC.
The 44A737829-001R02 high-capacity digital valve drive module is designed by GE Fanuc/OCMT and it is part of Series 90-30. The module is used with programmable logic controller devices and it is made from high quality materials. The unit is intended for operation on DC power and it is CE certified/U
This integrator rack features a rear mount installation type and uses natural convection for cooling. It operates effectively in temperatures ranging from -20°C to 60°C and can be stored within -40°C to 85°C. The rack supports relative humidity levels from 5% to 95% (non-condensing) and can be insta
This EEPROM memory unit does not require battery backup for data retention. Operating temperatures range from -10°C to 55°C, while storage temperatures are suitable from -20°C to 75°C. The memory supports an installation altitude of up to 1000 meters with a relative humidity range of 25% to 85%, non
The IC755CSS15CDACA terminal is a Quickpanel operator interface terminal for industrial internet applications. It has been manufactured by GE Fanuc.
This thumbwheel interface module functions effectively within a temperature range of 0°C to 60°C. It draws 90mA current at 24 Volts DC with nine units connected and 10mA at 9 Volts DC for a single unit. The module accommodates both 2-wire and 3-wire proximity switches and is equipped with an optical
The GE Fanuc Automation IC660EBA105 output block is a source analog output block. It comes with 6 outputs.
The GE Fanuc IC693ACC323 module is a power supply module with a minimum holdup time of 20 milliseconds. The power supply module comes with a nominal rated voltage of 120 to 240 Volts AC or 125 Volts DC.
The IC693DNS201 module is a DeviceNet slave module that is used with industrial programmable logic controllers. The module is produced by GE Fanuc and it is compatible with components from GE Series 90-30 and the PACSystems RX3i parts series.
The GE Fanuc IC697MDL240 Module is a discrete input module manufactured as part of Series 90-70. This module has 16 isolated input points with a voltage rating of 120 Volts AC. It also has an input filter delay time of 20 milliseconds.
This power supply module features jumper-selectable voltage settings. With an input current rating of 6 Amps, it operates within a frequency range of 48 to 63 Hz. The module provides a maximum load capacity of 85 volt-amperes and allows for inrush current management, with a typical inrush current of
This I/O interface module utilizes two 37-pin D-type connectors and is efficient for both operational and storage needs. Its operational range is from 0 to 40 °C, and it can be installed at altitudes up to 1000 meters. The module is designed to operate in environments with up to 80% non-condensing h