66038 results
This controller operates with a bus current rating of 1 Amp at 5V DC and 710 mA at 24V DC. It accommodates expansion with two Bulletin 1769 CompactLogix I/O modules and features 512 KB of user memory. Compatible components include the 1769-BA battery, 1769-ECR end cap, and 1769-RDQB door.
This removable terminal block features a wiring temperature rating exceeding 90 degrees Celsius. It allows wire sizes from 22 AWG to 14 AWG and supports up to 2 conductors per terminal. The block is rated for a screw torque of 1.36 Nm and requires a screwdriver with a maximum width of 8 mm. It is co
This AC drive is designed to manage input voltage ranges from 342 to 528 volts AC while providing an output voltage range from 0 to 460 volts AC. It operates with an input current of 5.7 Amps and features a Frame Size B designation. The device's compact panel mounting design simplifies installation,
This module is compatible with any Bulletin 1771 I/O chassis, offering a backplane current rating of 500 mA. It supports multiple input voltage ranges, including -5 to 5V DC, 0 to 10V DC, and others, alongside input current ranges from -20 to 20 mA. Top-overvoltage ratings include 200 volts for volt
This redundant power supply module requires two units for each redundant setup. It supports input voltage classes of 120 and 240 volts AC at a frequency range of 50 to 60 Hz. A notable feature includes a maximum inrush current of 20 amps, along with a hold-up time of 2 cycles. The device maintains a
This base unit features eight standard 24V DC inputs and eight dedicated fast inputs. It has six relay outputs and includes four standard and two fast 24V DC outputs. High-speed capabilities encompass eight inputs and two outputs running at 20 kHz. It requires a power supply rating of 30 watts.
Designed to operate efficiently with an input power requirement of 190 VA at 120V AC and 230 VA at 240V AC, this power supply module allows a maximum inrush current of 45 amps. Its internal output current capabilities are 10 amps at 5V DC and 2.88 amps at 24V DC. The module includes a non-replaceabl
This dual-axis inverter features a PWM frequency of 4 kHz and can handle continuous output currents up to 8 Amps, enhancing its operational range. When peak output is required, it can deliver a maximum of 20 Amps RMS and 28.2 Amps 0-pk. The design includes provisions for I/O, motor power, and motor
This logic module operates with a direct current (DC) voltage and is compatible with Panelview Plus terminals ranging from model 700 to 1500. It can endure operating shocks of up to 15 G for 11 milliseconds and non-operating shocks of 30 G for the same duration. The module supports operating tempera
Designed to fit within the POINT I/O system, the 1734-FPD operates with a nominal input of 120/240V AC and 12/24V DC, with a DC input voltage range of 10 to 28.8V DC. This module is open-style and supports a maximum input current of 10 Amps, while maintaining a continuous isolation voltage of 50 vol
This module supports configurable output types, ensuring flexibility in operation. Each output has a nominal on-state voltage of 24 volts DC, with a maximum on-state voltage of 32 volts. It also provides reverse voltage protection and includes output overtemperature detection and protection per poin
This logic module supports a power input of DC and operates efficiently within an ambient temperature range of 0 to 55 degrees Celsius. Non-condensing humidity levels between 5 to 95% are acceptable for operation. The module is marine certified, compatible with Panelview Plus 6 terminals ranging fro