Search Results
1926 results
IC600BF924
GE Fanuc Emerson / Series Six
The module features optically-coupled outputs for isolation and has a low voltage range starting at 50 VDC up to a maximum of 150 VDC. Rated for an enclosure type of IP00, the IC600BF924 operates in environments with humidity levels ranging from 5% to 95%. It can withstand storage temperatures up to
IC754VBI06MTD
GE Fanuc Emerson / Quickpanel
6 in. Mono with RS232/RS485 using 12 - 30 VDC
IC660BLM506
GE Fanuc Emerson / Genius I-O
The IC660BLM506 plug is a terminating plug with a 150-Ohm resistance rating. This device is installed in the Serial 1 and Serial 2 terminals for bus termination on the Genius I-O blocks.
IC694ALG222
GE Fanuc Emerson / RX3i PacSystem
The IC694ALG222 input module is a GE Fanuc analog input module. There are 16 input channels for making connections on the IC694ALG222 input module.
IC670CBL002
GE Fanuc Emerson / Field Control
Rated for use in operating frequencies from 50 to 60 Hertz, this cable can handle voltages of either 115 Volts AC or 24 Volts DC. It includes 20 pins and incorporates a braided drain wire that provides effective electrostatic protection. Installation is suitable up to 1,000 meters without requiring
IC693CBL305
GE Fanuc Emerson / Series 90-30
The GE Fanuc IC693CBL305 Wye Cable is made for the Series 90-30 axis communications coprocessor modules. It has has a maximum cable length of 1 foot and 25-Pin RS-232/RS-485 connectors.
IC200MDL241
GE Fanuc Emerson / Versamax
The GE Fanuc IC200MDL241 Discrete Input Module for the Versamax I/O and control system. This module has 16 non-isolated inputs in 2 groups of 8 inputs each with 240 Volts AC operating voltage and 110 milliamps of maximum backplane current consumption.
IC630MDL311
GE Fanuc Emerson / Series Three
The IC630MDL311 input module comprises 16 source inputs, operating at a nominal voltage of 24 volts DC. It demonstrates a maximum current output of 280 milliamps and consumes 5 volts DC for power. This device features a ripple of less than 3% RMS, ensuring clean operation. Voltage requirements to tr
IC693TCM302
GE Fanuc Emerson / Series 90-30
The IC693TCM302 temperature control module that is manufactured by GE Fanuc is part of Series 90-30. The IC693TCM302 module is a thermocouple input module and it has an output voltage range of 18 to 30 Volts DC. The unit has a load current of 100 milliAmps and a maximum off-state leakage of 0.1 mill
IC610MDL157
GE Fanuc Emerson / Series One
This output module operates within a 5 to 24 VDC voltage range, with a peak voltage capability of 40 VDC. The removable terminal block simplifies installation and maintenance. The typical on-state voltage drop is 1 Volt DC, rising to a maximum of 2 Volts DC at full load. The leakage current is measu