Search Results
1928 results
ST-3114
GE Fanuc Emerson / RSTi PacSystem
This input module features four channels for analog input and has an impressive update rate of 4 milliseconds for all channels. It showcases an input impedance of 120 Ohms and requires a maximum internal power of 165 mA at 5V DC. Its compact dimensions of 70 x 12 x 99 mm and connection through sprin
IC754VBI08CTD
GE Fanuc Emerson / Quickpanel
8 in. Color-TFT with RS232/RS485 using 12 - 30 VDC
IC655MDL526
GE Fanuc Emerson / Series Five
This input module accommodates 32 circuits divided into 4 input groups. It has an input current specification of 14.5 mA at a nominal voltage of 115 VAC and operates within a temperature spectrum of 0 to 60 °C. The terminal block features a convenient 38-point format. Its key positions are designate
IC610MDL127
GE Fanuc Emerson / Series 90-30
This input module supports a voltage input of 230V AC and features channels for signal processing. It switches ON when the voltage exceeds 180V AC and OFF when it drops below 40V AC. The unit has a power consumption of 10 mA at 9V DC and weighs 140 grams, including circuit indicators located on the
IC693CPU366
GE Fanuc Emerson / Series 90-30
This baseplate features a 16-bit processor architecture and a memory capacity of 1,024 words for registers. The system offers substantial input and output capabilities with 160 discrete I/O points, complemented by 64 analog inputs and 32 analog outputs. It supports communication via a single RS-485
IC693MDL653
GE Fanuc Emerson / Series 90-30
The IC693MDL653 input controller is a GE Fanuc programmable controller classified under Series 90-30. The IC693MDL653 controller is a 24 Volts DC positive or negative logic input controller and it comes with up to 32 input points.
IC693MDL731
GE Fanuc Emerson / Series 90-30
The IC693MDL731 output module provides up to 8 output points and operates at a rated voltage of 12/24 V DC. Each output can handle a maximum current of 2.0 A. The module features response times of 2 ms for both on and off states, along with 8 green LED indicators for status monitoring. It is suitabl
IC693DSM302
GE Fanuc Emerson / Series 90-30
The GE Fanuc motion controller known as the IC693DSM302 motion controller is part of GE Series 90-30 and it provides additional capabilities for programmable logic controllers (PLCs). The unit comes with 2 axes and a serial port for firmware updates.
IC754VBB06MTD
GE Fanuc Emerson / Quickpanel
6 in. Mono with RS232/RS485 using 12 - 30 VDC
IC754VGF08CTD
GE Fanuc Emerson / Quickpanel
8 in. Color-TFT with RS232/RS485 using 12 - 30 VDC