Search Results
1961 results
ST-7518
GE Fanuc Emerson / RSTi PacSystem
This potential distribution module supports a maximum of 8 I/O points and integrates with PROFINET networks. Operating under temperature conditions ranging from 32°F to 104°F, it meets storage temperature requirements between 32°F and 122°F. Both operating and storage humidity levels are accommodate
IC600YB908
GE Fanuc Emerson / Series Six
This output module supports a maximum response time of 1 millisecond with an on-state voltage drop not exceeding 2.25 volts. The operating temperature range for the IC600YB908 is from 0 to 60°C, with a humidity tolerance spanning 5 to 95% without condensation. Its total on-state current capacity is
IC200UEX012
GE Fanuc Emerson / Versamax
This discrete expansion I/O module supports 14 inputs and 6 outputs, employing 24V DC inputs and relay output types. It is designed for use with micro PLCs, allowing for the addition of up to four expansion modules per unit. The power supply voltage required for operation is 24V DC, with the input p
ST-2852
GE Fanuc Emerson / RSTi PacSystem
This GE Fanuc Emerson output module consists of two outputs, each capable of a load current up to 0.5 A. It operates within an output voltage range of 15-132 VAC at 47-63 Hz frequencies. The module requires a nominal field power rating of 120 VAC, with a voltage range between 12 and 125 VAC, and con
IC655PWR500
GE Fanuc Emerson / Series Five
This power supply module features jumper-selectable voltage settings. With an input current rating of 6 Amps, it operates within a frequency range of 48 to 63 Hz. The module provides a maximum load capacity of 85 volt-amperes and allows for inrush current management, with a typical inrush current of
IC693CMM304
GE Fanuc Emerson / Series 90-30
This EEPROM memory unit does not require battery backup for data retention. Operating temperatures range from -10°C to 55°C, while storage temperatures are suitable from -20°C to 75°C. The memory supports an installation altitude of up to 1000 meters with a relative humidity range of 25% to 85%, non
IC697MDL671
GE Fanuc Emerson / Series 90-70
The IC697MDL671 module is an accessory part from Series 90-70 by GE Fanuc. This interrupt input module operates on 24 Volts DC voltage and it features 16 inputs in 4 groups of 4 each. The unit has an input current of 10 milliAmps and an isolation voltage of 1500 Volts.
IC610MDL180
GE Fanuc Emerson / Series One
This relay output module operates with a 4 to 265V AC voltage range and supports line frequencies between 47 and 63 Hz. It has a peak inrush current rating of 5 A and a maximum leakage current of 1 mA. Additionally, the minimum recommended load is specified as 5 mA, with a delay time of 5 millisecon
IC600YB912
GE Fanuc Emerson / Series Six
This module is equipped with six outputs and is rated for a maximum ON-state current of 3 Amperes. It features an IP20 protection rating, ensuring basic protection against solid objects. The module has a maximum operating temperature of 60°C and can withstand storage temperatures from -20°C to 80°C.
IC600BF905
GE Fanuc Emerson / Series Six
This GE Fanuc Emerson output module is engineered for installation within an I/O rack or specifically in the I/O Rack Section of a Model 60 CPU. It utilizes an open enclosure design and supports user and circuit board terminal blocks. Additionally, this module is equipped with output lights to indic