Search Results
1961 results
IC600YB908
GE Fanuc Emerson / Series Six
This output module supports a maximum response time of 1 millisecond with an on-state voltage drop not exceeding 2.25 volts. The operating temperature range for the IC600YB908 is from 0 to 60°C, with a humidity tolerance spanning 5 to 95% without condensation. Its total on-state current capacity is
ST-2852
GE Fanuc Emerson / RSTi PacSystem
This GE Fanuc Emerson output module consists of two outputs, each capable of a load current up to 0.5 A. It operates within an output voltage range of 15-132 VAC at 47-63 Hz frequencies. The module requires a nominal field power rating of 120 VAC, with a voltage range between 12 and 125 VAC, and con
ST-3708
GE Fanuc Emerson / RSTi PacSystem
This GE Fanuc Emerson RTD module supports eight inputs dedicated to temperature-sensing applications. It includes diagnostic capabilities for both open channels and over-range conditions. The RTD module operates with a maximum internal power rating of 100 mA at 5V DC and connects via a Hirose connec
ST-7518
GE Fanuc Emerson / RSTi PacSystem
This potential distribution module supports a maximum of 8 I/O points and integrates with PROFINET networks. Operating under temperature conditions ranging from 32°F to 104°F, it meets storage temperature requirements between 32°F and 122°F. Both operating and storage humidity levels are accommodate
IC200UMB001
GE Fanuc Emerson / Versamax
As a flash memory board within the VersaMax Micro series, the IC200UMB001 seamlessly integrates with Micro 20, Micro 40, and Micro 64 PLC models. It can accommodate a capacity of 128 KB within compatible Micro 64 PLCs and receives power via Port 2 on the Micro PLC.
ST-3524
GE Fanuc Emerson / RSTi PacSystem
This module houses four channels, each capable of processing input with a resolution of 12 bits, equating to 4.8 mV per step. It offers a voltage range from -10 to 10 volts DC and operates at a fast update rate of 4 milliseconds for all channels. The module's input impedance of 500 kilohms facilitat
IC655PWR500
GE Fanuc Emerson / Series Five
This power supply module features jumper-selectable voltage settings. With an input current rating of 6 Amps, it operates within a frequency range of 48 to 63 Hz. The module provides a maximum load capacity of 85 volt-amperes and allows for inrush current management, with a typical inrush current of
IC697ACC702
GE Fanuc Emerson / Series 90-70
This bus terminator is equipped with a 25-pin connector and is compatible with standard PLC systems. It can facilitate redundancy setups and works with expansion port out ports. Additionally, when utilized as the final part of I/O bus expansion chains, it enhances system connectivity. Operating cond
IC697MDL671
GE Fanuc Emerson / Series 90-70
The IC697MDL671 module is an accessory part from Series 90-70 by GE Fanuc. This interrupt input module operates on 24 Volts DC voltage and it features 16 inputs in 4 groups of 4 each. The unit has an input current of 10 milliAmps and an isolation voltage of 1500 Volts.
IC630MDL368
GE Fanuc Emerson / Series Three
This GE Fanuc Emerson output module operates effectively across an ambient temperature range of 0 to 60 °C. It has LED indicators and can handle a humidity range of 5 to 95%. The unit can also be stored within a temperature range of 0 to 70 °C, ensuring reliable performance in various conditions.