Search Results
1926 results
IC693PRG301
GE Fanuc Emerson / Series 90-30
This portable programmer supports a diagnostic startup function that self-checks once power is supplied to the PLC. It is configured for I/O hardware setup. Operating temperature ranges from 0°C to 60°C, and it maintains functionality in relative humidity levels between 5% and 95%. The unit can be s
IC697CPU789
GE Fanuc Emerson / Series 90-70
This CPU module features one serial port and operates at a clock speed of 16 megahertz. It includes four LED indicators for status monitoring. The isolation is achieved through backplane-isolated communication, and it operates reliably within a temperature range of 0°C to +60°C.
IC600YB827
GE Fanuc Emerson / Series Six
As a high-speed counter module, the IC600YB827 can handle a maximum supply voltage of 30 volts DC. Its output current capabilities include a continuous rating of 250 mA and a peak output of 500 mA for brief periods lasting one second. The device features low on-state voltage drops of 0.4V at 150 mA
IC600YB910
GE Fanuc Emerson / Series Six
This output module features six outputs, with a maximum on-state current of 3A per output. Leakage when the module is off is recorded at 4 mA. It can withstand a maximum inrush current of 20A for 33 ms, ideal for applications with high starting demands. The module exhibits an average output voltage
IC693PCM300
GE Fanuc Emerson / Series 90-30
Designed for placement on the CPU baseplate, this module facilitates communication with terminals and CRT displays. The IC693PCM300 supports protocols such as Modbus RTU and GE Fanuc CCM. It includes a lithium battery to ensure RAM memory retention during power outages, alongside programming capabil
IC695SPF010
GE Fanuc Emerson / RX3i PacSystem
The GE Fanuc Automation IC695SPF010 scanner module has different kind of connectors. It can be programmed and monitored through the Proficy Machine Edition software.
IC630PWR300
GE Fanuc Emerson / Series Three
This GE Fanuc Series Three power supply module features two captive screw fasteners for secure installation and includes a CPU programmer bracket for easier setup. It is equipped with a fault relay, run contacts, and connectors to expand to the next upstream base unit and connect with the CPU in the
IC697CBL700
GE Fanuc Emerson / Series 90-70
This kit features a D-Type 9-pin connector for reliable signal transfer, supporting both 5V control and power signals. It operates effectively within a frequency range of 50 to 60 Hz, and the reset time is rated at 200 ms. The operating temperature range allows for use in environments from 0°C to 50
IC600YB902
GE Fanuc Emerson / Series Six
This output module requires a maximum of 5 Volts DC and 400 milliamps for optimal power operation. It supports operating conditions from 0 to 60 degrees Celsius, and handles humidity levels of 5 to 95% without condensation. Additionally, it functions efficiently in storage temperatures ranging from
IC610MDL103
GE Fanuc Emerson / Series One
This I/O module is engineered for a rated voltage of 24 Volts DC and can accommodate up to four inputs and four outputs. It has a maximum input voltage of 36 Volts DC under open circuit conditions and provides a maximum output current of 0.5 Amperes. Response time for input transitions ranges from 4