Search Results
496 results
131380-19
Yaskawa / Accessories
The gripper supports robotics, milling, and factory automation applications. It operates effectively within a temperature range of 0 to 40 degrees Celsius and can be stored at temperatures up to 50 degrees Celsius. It can withstand maximum humidity levels of 80% without causing condensation and is r
JAMSC-B1064
Yaskawa / Accessories
This output module is designed for a maximum ambient temperature of 60 degrees Celsius and can operate in conditions as low as 0 degrees Celsius. It has a natural cooling mechanism and boasts IP20 protection, making it suitable for various environments. The device can withstand humidity levels of up
142131-1
Yaskawa / Accessories
This wrist module features a motion range of R ±360 °, B ±130 °, and T ±360 °, enabling extensive operational capabilities. It achieves a maximum angular speed of 175 °/s for the R-axis, 145 °/s for the B-axis, and 240 °/s for the T-axis, ensuring high-speed performance. The component supports a pea
142134-1
Yaskawa / Accessories
This timing belt has a total of 100 teeth and a width of 20 mm. It performs well across a temperature range from -20°C to 100°C. With a tensile strength exceeding 2200 N, it meets demands for durability. The belt exhibits moderate oil resistance and operates at a noise level under 60 dB.
TFUE-05ZC7
Yaskawa / Accessories
This encoder feedback unit features a durable aluminum housing and uses a 6-pin connector for connectivity. It outputs quadrature signals (A, B, Z) and is rated IP50 for protection against dust. The unit operates at a torque of less than 0.5 N·m and can withstand storage temperatures from –40°C to +
JAPMC-AN2300
Yaskawa / Accessories
This module has a weight of 1 kg and dimensions of 30 cm in length, 8 cm in width, and 27 cm in height. It is rated for operation in ambient temperatures from 0°C to 60°C and can withstand humidity levels of up to 95% while remaining non-condensing. Designed for installations up to 1000 meters above
139476-1
Yaskawa / Accessories
This reducer is suitable for T-Axis applications and has a maximum input speed of 3000 rpm. It delivers a rated torque of 120 Nm and a maximum output torque of 200 Nm, while maintaining a backlash of less than 1 arc-minute. The protection rating is IP54, providing resistance to dust and water ingres
142140-1
Yaskawa / Accessories
This speed reducer is suitable for S-axis applications, supporting a maximum input speed of 3000 rpm. It features a flange mount for secure installation and weighs 1.8 kg. Rated for maximum output torque of 30 Nm, it has a moment load capacity of 20 Nm and maintains a backlash of ≤ 5 arc-min, ensuri
143974-1
Yaskawa / Accessories
With a section width of 13 mm, the 143974-1 incorporates dual rubber contact seals and is pre-filled with NS7 grease. It supports dynamic radial loads up to 16.0 kN and static loads of 13.3 kN, with limiting speeds of 4,500 rpm using grease and 16,200 rpm with oil. Built with a normal radial interna
140386-1
Yaskawa / Accessories
This wire feeder functions effectively within a temperature range of 0 to 40 degrees Celsius. It supports up to 80% maximum operating humidity and is engineered for high-altitude locations, with a maximum of 1000 meters above sea level.