Search Results
155 results
ETC618391-S3021
Yaskawa / GPD
This inverter drive board is optimized for a temperature range of 0°C to 55°C during operation and can be stored in environments ranging from -20°C to 60°C. It functions effectively in non-corrosive environments with a relative humidity limit of 95% or less. With a compact weight of 0.14 kg (0.31 lb
CIMR-AU5A0052FAA
Yaskawa / GPD
This component features an input frequency of either 50 or 60 Hz, and its output voltage can range from 0 to 600 V AC. The enclosure rating of NEMA 1 indicates suitability for indoor applications. Additionally, it offers adjustable output frequency up to 400 Hz, accommodating diverse motor control n
GPD333-DS022
Yaskawa / GPD
With a minimum frequency setting of 50 Hz and a maximum of 60 Hz, the GPD333-DS022 operates efficiently across a variety of applications. This device is rated for use in environments with humidity levels up to 80% RH, both during operation and storage. It can be installed at altitudes of up to 1000
GPD515C-A080
Yaskawa / GPD
Within the Yaskawa GPD series, this AC drive presents an input frequency of 50/60 Hz and provides an overload capacity of 150% for 60 seconds. It operates efficiently within an ambient temperature range of -10 to 50 °C and has a protection class rating of IP20. The drive weighs around 2.3 kg (5 lbs.
GPD-515-G5-Parameters
Yaskawa / GPD
This AC drive parameter set allows access to both basic and advanced settings via a parameter range of n001 through n199 for basic functions and d001 through d199 for advanced ones. It features input methods such as analog and keypad for frequency reference and terminals for run commands. Additional
GPD-505-Operation-at-Load
Yaskawa / GPD
This AC drive allows an output frequency range from 0.2 to 400 Hz and features adjustable acceleration and deceleration times controlled by parameters n019 and n020, respectively. It can handle an overload capacity of 150% for one minute and provides stall prevention through parameters n070 to n072.
GPD-333-A-B-1771-SDN-Configuration
Yaskawa / GPD
This scanner module operates on DeviceNet and communicates via polled I/O. Addressing is configured through DIP switches on the 1771-SDN. The module manages a produce assembly for drive status and a consume assembly for drive control, while communication timing is dictated by the polling cycle in re
GPD-315-Initial-Start-up
Yaskawa / GPD
This start-up procedure device is utilized in AC motor control applications. It requires the motor rated voltage and current to be configured through specific parameters, namely n012 and n036. Operating modes include V/f or Open-loop Vector control, selectable via parameter n002. It is crucial to se
CIMR-AU4A0023UAA
Yaskawa / GPD
This AC drive is designed to operate at an input voltage of 380-480 V AC in three-phase configurations. The rated output current is 23 A with a vector control method. It boasts an overload capacity of 150% of the rated current for one minute and features an enclosure rated at IP20 for basic protecti
GPD503-DS316
Yaskawa / GPD
This drive is designed for three-phase operation and handles a current rating of 13 A. The unit has a maximum operating temperature of 60 degrees Celsius and a minimum of 0 degrees Celsius. It operates effectively in humidity levels up to 80% (non-condensing) and can be stored safely under the same