160-AA03NSF1P1

The Allen–Bradley AA03NSF1P1 is a Variable Speed Drive from bulletin 160. This speed drive is power supplied over 3-phase 200 to 240V AC voltage. This bulletin 160 member provides at its output 0.55kW (0.75HP) of power and 3.0A of current. The 160-AA03NSF1P1 is protected in IP20 (open) enclosure. The 160-AA03NSF1P1 160 SSC series drive is designed to be controlled by an analog input signal follower option. The program keypad module is an advanced feature installed on the drive; this 7-segment LED display can be used in its display mode (view all read-only drive parameters) or programming mode. The program mode indicator flashes when the drive is in programming mode. The output frequency of this drive can be managed over the TB3 control terminal block by using the analog frequency sources of ±10 Volts or 0 to 10 Volts DC potentiometer frequency control, or a 4 to 20 mA frequency control. The analog signal follower model can also operate with a special input mode in which the drive will be operated via preset speed inputs. The user can even apply multiple drive analog connection by connecting a single potentiometer to multiple drives (note: if this is the case, connect commons on the TB3 terminals together on all drives). The Allen–Bradley 160-AA03NSF1P1 can apply several different control methods, including a PWM algorithm, current limiting control method, V/Hz ratio control, and DC boost control. Its HMI is composed of an LCD display, control inputs and indicators (start, stop, and reverse), and selector keys (up, down, enter, escape, and select).  The 160-AA03NSF1P1 enclosure’s dimensions are 165 x 152 x 80 millimeters (6.51 x 6.00 x 3.15 inches). The product’s weight is approximately 2.07 pounds (0.94 kilograms). It requires ambient working temperatures of 0 to 50 degrees Celsius; the drive is fan cooled over a fan opening on its bottom side.