160-BA02NPS1P1

This variable speed drive by Allen Bradley, the 160-BA02NPS1P1, is designed under the standards of the 160 Series of variable speed drives. The Allen-Bradley 160-BA02NPS1P1 variable speed drive is designed with a NEMA enclosure for industrial purposes, which protects the unit against environmental threats or damages, and at the same time, allows the unit to withstand temperatures within a range of 0 to 50 degrees Celsius, and allows the unit to remain within a relative humidity of up to 95% without condensing. The Allen-Bradley 160-BA02NPS1P1 variable speed drive operates with a three-phase output motor rating of 0.55 kW and a maximum output Amp of 1.7. The power dissipation for this unit is 30 Watts, while the input voltage is 380 to 460 Volts AC and the frequency stays between 50 and 60 Hertz. Due to the high operating temperature that the 160-BA02NPS1P1 unit can reach, this module features a cooling fan as a primary cooling method. This module can also lose heat by way of the ventilation provided by the fan and by the convection method. In order to allow this, a small amount of extra space should be left on each side of the unit.

The Allen-Bradley 160-BA02NPS1P1 variable speed drive is capable of withstanding vibrations of up to 1.0 G and a shock of around 15 G while it is operating. It can also operate at altitudes as high as 1000 meters without disintegrating. The Allen-Bradley 160-BA02NPS1P1 variable speed drive has an LED display with a two-digit parameter number and a four-digit value, as well as keypad controls with 4 buttons, specifically Speed, Run, Stop and Direction. These features allow the operator to check and make quick changes required by the motor that is connected to this variable speed drive, or by the process that it is operating.