160-BA04NSF1P1

The 160-BA04NSF1P1 is a Variable Speed Drive (VSD) from the Bulletin 160 Smart Speed Controller (SSC) series. This drive has an input supply voltage requirement of 380-460 VAC, 3-Phase along with an input frequency of 50/60 Hz. It also has an input current rating of 4.6 Amperes and input power of 3700 VA. The drive’s output parameters include voltage range of 380-460 VAC, 3-Phase, a motor applicable output current of 4.0 Amperes, the programmable output frequency of 0-240 Hz, and output power rating of 1.5 kW or 2 Horsepower. This drive has embedded control inputs and output terminals. The discrete input terminals are composed of fixed input terminals such as Start, Stop, Forward / Reverse, and a single fully programmable input. Being a signal follower model drive, it has an analog input terminal that accepts a 1K to 10K Ohms, 2 Watts Minimum potentiometer, a 4-20 mA analog input, and -10 to +10 VDC channels. This drive also has a Form C relay contact output that is rated 0.4A at 125VAC; 0.2A at 230VAC and 2A at 30VDC for resistive outputs and 0.2A at 125VAC; 0.1A at 230VAC and 1A at 30VDC for inductive loads. The 160-BA04NSF1P1 has an Open Type, IP20 enclosure rating It must be mounted within an enclosure that provides adequate protection against industrial contaminants such as dirt, dust, gas, oil, chemicals, water, and similar elements. It supports mounting to a standard 35 mm DIN rail or panel mounting in horizontal orientation. A program keypad module is installed on this drive, allowing operators and users to locally configure, operate, maintain and troubleshoot the drive.

The 160-BA04NSF1P1 is a compact-designed Smart Speed Controller (SSC) from Allen Bradley. This drive is manufactured by Rockwell Automation. This drive is a 3-phase input voltage of 380 to 460 Volts at 50 to 60 Hertz and 4.7 kVA, the drive’s output is rated at 1.5kW, 2 HP, and has an output current rating of 4.0 Amps. The dynamic braking torque with an external resistor is 150% and without an external resistor is 50%. For the IP20 (open style enclosure), the power dissipation is 50 Watts. This controller features electronic motor overload protection, self-generating EDS files, a programmable duty cycle, and a configurable output contact. The 160-BA04NSF1P1’s typical efficiency rate is scaled at 95%, and this module operates efficiently at an ambient temperature between 32 and 122 degrees Fahrenheit. The drive should be stored at a temperature ranging from -40 to 185 degrees Fahrenheit and at a relative humidity ranging from 0 to 95%, non-condensing. As an analog signal follower model drive, it has analog inputs of 4 to 20 mA and -10 to 10 Volts DC with an input impedance of 250 ohms and 100k Ohms respectively. The 160-BA04NSF1P1 comes with a Program Keypad Module, which is situated at the front panel of the controller, which is used to read and program the controller parameters. This module operates in two modes, which are the Display Mode (which is the default and controller power-up mode), and the Program Mode. In the former mode, the controller parameters can only be displayed but not changed while in the latter mode (entered by pressing the ESC key), the controller parameters can be altered. The module has a 6-digit, seven-segment LED display, three keys for controlling input to the drive, and five keys for programming and displaying drive parameters. It also has a Program Mode indicator and two-directional LED indicators.