DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Description: The Allen-Bradley/Rockwell Automation 2071-AP1 drive is a Kinetix 3 series industrial servo drive. Some of the servo drives in the Kinetix 3 series support shunt resistors, but the 2071-AP1 servo drive does not. The 2071-AP1 servo drive is a single-phase type of servo drive with an input voltage rating of 240 Volts AC. Its power rating is 100 Watts. The 2071-AP1 servo drive uses copper wires with sizes of 14 AWG or 2.4 millimeters square.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 2071-AP1. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 2071-AP1 |
Product Line | Kinetix 3 Servo Drive |
Input Voltage | 240V AC |
Phase | One-Phase |
Output Current | 1.1 A |
Input Current | 2.38 A |
Shunt Power | Not Applicable |
Recommended Motor | TL-A130P |
Mode | Indexing |
Wattage | 100 Watt |
Communication | RS-232 and RS-485 |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 2071-AP1 |
Product Line | Kinetix 3 Servo Drive |
Input Voltage | 240V AC |
Phase | One-Phase |
Output Current | 1.1 A |
Input Current | 2.38 A |
Shunt Power | Not Applicable |
Recommended Motor | TL-A130P |
Mode | Indexing |
Wattage | 100 Watt |
Communication | RS-232 and RS-485 |
The 2071-AP1 part by Allen Bradley is an AC Input and power control drive belonging to the Kinetix 3 series of Servo Drives designed for industrial process control. This drive is powered by an input voltage of 240 Volts AC, used on One-Phase operations. It is recommended to use the FNQ-R-7 fuse for this module’s input power. Its control power should be applied to any of the following fuses: FRS-R-2-½, FNQ-R-7-½, or LPJ-6. It has an output current consisting of 1.1 A, while its input current is around 2.38 A. Its contactor is the 100-K05xy.
This particular drive operates best with a TL-A130P and a 100 Watt power source but does not support shunt resistors, so do not attempt to make terminations to either the B1 or the B2 terminals. To maximize user control, the 2071-AP1 contains an indexing mode and a designed communication port for both RS-232 and RS-485 communication methods. This unit does not have a torque value.
It is recommended to use a wire size of 2.4 millimeters squared (or 14 AWG), and a strip length of approximately 8 millimeters (or 0.3 inches).
Allen-Bradley Kinetix 3 Servo Drive with One-Phase, 1.1 A Output Current, and 100 Watt Power
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 2071-AP1. All of our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 2071-AP1 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
2071-AP1 Ser A
|
2071-AP1/A, Series A, Rev A | Request Quote |
2071-AP1 Ser B
|
2071-AP1/B, Series B, Rev B | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 2071-AP1 |
Product Line | Kinetix 3 Servo Drive |
Input Voltage | 240V AC |
Phase | One-Phase |
Output Current | 1.1 A |
Input Current | 2.38 A |
Shunt Power | Not Applicable |
Recommended Motor | TL-A130P |
Mode | Indexing |
Wattage | 100 Watt |
Communication | RS-232 and RS-485 |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 2071-AP1 |
Product Line | Kinetix 3 Servo Drive |
Input Voltage | 240V AC |
Phase | One-Phase |
Output Current | 1.1 A |
Input Current | 2.38 A |
Shunt Power | Not Applicable |
Recommended Motor | TL-A130P |
Mode | Indexing |
Wattage | 100 Watt |
Communication | RS-232 and RS-485 |
The 2071-AP1 part by Allen Bradley is an AC Input and power control drive belonging to the Kinetix 3 series of Servo Drives designed for industrial process control. This drive is powered by an input voltage of 240 Volts AC, used on One-Phase operations. It is recommended to use the FNQ-R-7 fuse for this module’s input power. Its control power should be applied to any of the following fuses: FRS-R-2-½, FNQ-R-7-½, or LPJ-6. It has an output current consisting of 1.1 A, while its input current is around 2.38 A. Its contactor is the 100-K05xy.
This particular drive operates best with a TL-A130P and a 100 Watt power source but does not support shunt resistors, so do not attempt to make terminations to either the B1 or the B2 terminals. To maximize user control, the 2071-AP1 contains an indexing mode and a designed communication port for both RS-232 and RS-485 communication methods. This unit does not have a torque value.
It is recommended to use a wire size of 2.4 millimeters squared (or 14 AWG), and a strip length of approximately 8 millimeters (or 0.3 inches).
Allen-Bradley Kinetix 3 Servo Drive with One-Phase, 1.1 A Output Current, and 100 Watt Power
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 2071-AP1. All of our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 2071-AP1. All of our repairs come with a 1 Year Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the 2071-AP1 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
2071-AP1 Ser A
|
2071-AP1/A, Series A, Rev A | Request Quote |
2071-AP1 Ser B
|
2071-AP1/B, Series B, Rev B | Request Quote |