20AB2P2A3AYYNCNN

The Allen-Bradley/Rockwell Automation 20AB2P2A3AYYNCNN is a PowerFlex 70 variable frequency drive. As with other drives in the same family, the 20AB2P2A3AYYNCNN has jumpers which are able to be installed and removed with ease. The drive has a compartment for storing extra jumpers or for storing the ones which have been removed for later use. Where a cover protects the jumpers, the cover is easily removable to allow for easy access when installing or removing the jumpers. Note that the cover should never be left open. Once activities around the jumper area have been completed, the protective cover should be replaced.

The Allen-Bradley 20AB2P2A3AYYNCNN has a current rating of 2.2 Amps and an apparent power rating of 0.37 kilowatts. The drive can run a motor with a Horsepower rating of 0.5 Horsepower. The drive supports a panel-mounted enclosure with an international protection rating of IP20. The 20AB2P2A3AYYNCNN comes fitted with a full numeric keypad with a Liquid Crystal display (LCD). Apart from helping in the programming activities of the drive’s parameters, the LCD is used to indicate faults and alarms as they occur. An alarm is a warning message that the drive may indicate a fault and or stop running if the condition is not corrected in time. In most cases, an alarm is graphically displayed using a bell on the LCD. Although additional communication devices and networks can be interfaced with the 20AB2P2A3AYYNCNN through the terminal block, the drive has an in-built ControlNet (Coax) port. The 20AB2P2A3AYYNCNN contains a brake IGBT and an internal brake resistor.