20AC015C3AYNANC0

The Allen-Bradley 20AC015C3AYNANC0 variable speed drive operates with a 3-phase 400 Volts AC voltage and a frequency of 50 Hertz. It also has an amperage rating of 15 Amps. The Allen-Bradley 20AC015C3AYNANC0 variable speed drive has a wall or machine-mounted enclosure that provides Level 4X and Level 12 protection to the drive. This enclosure prevents the entrance of foreign particles into the drive, like dust particles. It is important to keep the drive in an environment without corrosive chemicals and liquids. The maximum ambient air temperature allowed for this drive with this specific enclosure is 40 degrees Celsius. Another important thing to do when installing the Allen-Bradley 20AC015C3AYNANC0 variable speed drive is to leave clearances and to ground all the equipment connected to it.

Before starting the Allen-Bradley 20AC015C3AYNANC0 variable speed drive, the input voltage must be verified, the control and output wiring must be checked, and the AC power and control voltages must be applied to the drive. The Allen-Bradley 20AC015C3AYNANC0 variable speed drive comes with status indicators. These show whether the drive is ready, running, or experiencing a fault. These indicators are green, yellow, and red. Indicators for the internal port communications module, communications module, network, and the secondary network are also included. The most common faults for the Allen-Bradley 20AC015C3AYNANC0 variable speed drive are related to motor overload, over-speed, and overcurrent limits, Volts, and ampere ranges. The Allen-Bradley 20AC015C3AYNANC0 variable speed drive does not have a communication module but it has the space to install one. It features an enhanced control I/O.