20AC2P1A3AYNANNN

The 20AC2P1A3AYNANNN PowerFlex 70 Adjustable AC Drive is a variable frequency drive by Allen-Bradley designed to provide out-of-the-box performance in a wide range of applications requiring exceptional speed and torque control. It is designed with a dynamic brake transistor which provides cost-effective regenerative energy switching when slowing down is required, and it also comes with a CE standard EMC line filter, which provides shielding from electromagnetic noise. The 20AC2P1A3AYNANNN has a normal duty rating of 0.75 kilowatts, 2.1 Amps at 400 Volts AC, and a rated operating range of -/+10% of nominal input. It offers 200,000 Amps maximum fault limit using circuit breakers and fuses, and a displacement power factor of 0.98 across a 40:1 speed range. It offers protection against line transient spikes, phase-to-phase faults, and phase-to-ground faults using metal oxide varistors, and it provides overvoltage and under-voltage regulation as well as current limiting for maximum operation.

The 20AC2P1A3AYNANNN features inertia ride-through which provides trip-less operation during a prolonged power loss by using the rotational energy stored in high inertia loads, and it offers a space-saving dynamic brake transistor installed as standard features and an ECM line filtering built to meet the CE standard requirements. The 20AC2P1A3AYNANNN is programmed for standard Volts per Hertz control, and it can deliver 0.5% open-loop speed regulation using slip compensation. It has a 3-phase output voltage adjustable from 0 to the rated motor voltage, and a programmable output frequency programmed from 0 to 400 Hertz. It offers Class 10 motor overload protection, and it can be programmed for 2 separate acceleration and deceleration times for optimized performance. The 20AC2P1A3AYNANNN has a cost-effective LCD operator interface module, with full-featured numeric keypad and easy-to-read multi-language descriptive text for start-up, metering configuration, and troubleshooting. It has an IP20-rated indoor/outdoor enclosure suitable for panel mounting and zero stacking, and it has a 0 to 50 degrees Celsius operating temperature range without de-rating. The 20AC2P1A3AYNANNN is designed to meet the ABS, CE, cUL-us, KCC, and the RCM standards, and it weighs approximately 6.0 kilograms.