20AD034F0AYNADNN

The 20AD034F0AYNADNN is an adjustable frequency AC drive from the PowerFlex 70 series that is manufactured by Allen-Bradley. Before beginning the installation, make sure there is no voltage present on the power lines and that the voltage on the bus capacitors is zero. The DC bus voltage is a measurement of the instantaneous value. It is used as the baseline to sense a power loss condition. If the 20AD034F0AYNADNN drive enters the power loss state, it will be used for the recovery process. The drive must be operated on an input voltage of 480 Volts AC and the drive has a current rating of 34 Amps. The power output of the drive is 18.5 kW or 25 Horsepower.

The 20AD034F0AYNADNN drive has a flange-mounted enclosure which can be used to mount the drive on flanges. While installing the drive, make sure to follow the minimum clearance requirements because it is necessary to avoid the drive from overheating and to allow air flow. There is no HMI interface present on the drive. It has a DeviceNet communication port. The users must follow the safety precautions while performing the installation because this is for their safety and to ensure that the drive will not be damaged. The drive must be installed only by qualified personnel who are familiar with installing the adjustable frequency AC drive. Necessary downtime must be planned for and the users must be informed of it accordingly. The 20AD034F0AYNADNN drive must be operated in an industrial environment where the temperature range is between 0 and 50 degrees Celsius and the humidity does not exceed 95%, non-condensing.