Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley PowerFlex 70 20AD1P1A0AYNANC0

Product image is representative; revision or series may vary. Contact us to request a specific version.

20AD1P1A0AYNANC0

|

The Allen-Bradley 20AD1P1A0AYNANC0 adjustable frequency drive is a 1.1 Amp rated AC drive. In addition, it is a 0.37 kW rated unit and has a ND output rating of 0.5 horsepower. This AC drive is a size A frame. It has power requirements of 480V AC. This PF70 has a blank cover in place of the HIM module.

Out of stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 20AD1P1A0AYNANC0

ManufacturerAllen Bradley
CategoryDrives
Product LinePowerFlex 70
Part Number20AD1P1A0AYNANC0
UPC820919213809
Weight8.44 lbs (3.83 kg)
Voltage480V AC
Ph3
Amps1.1
kW(Hp)0.37 (0.5)
FrameA
EnclosurePanel Mount - IP 20, NEMA/UL Type 1
Interface ModuleBlank Cover
TypeManual
w/BrakeYes
w/ResistorNo
RatingFiltered A & B Frames (Optional) C, D, & D Frames (Standard)
Network TypeNone
ControlEnhanced
Safe OffNo
FeedbackNo Feedback - Enhanced Control

The 20AD1P1A0AYNANC0 is an Allen-Bradley drive that is manufactured under the Allen-Bradley PowerFlex 70 series. The drive voltage power is 480 Volts AC running on 3-phase power. The interface module for the 20AD1P1A0AYNANC0 is a blank cover manual type and the enclosure is the panel mount IP20, NEMA/UL Type 1 enclosure with a conformal coating. It is running on enhanced control, with 1.1 Amps of current, the 20AD1P1A0AYNANC0 produces 0.5 Horsepower in normal duty and 0.33 Horsepower in heavy-duty. It comes with the IGBT braking installed but it does not have a drive-mounted brake resistor.

The 20AD1P1A0AYNANC0 has a second environment filter per the CE EMC directive and it does not come with the communication module installed. The AC drive features an enhanced control with no feedback. The motor control for the 20AD1P1A0AYNANC0 is volts per hertz control, sensorless vector control, and flux vector control. The electrical voltage tolerance for the 20AD1P1A0AYNANC0 is -10% of minimum and +10% on the maximum. The frequency tolerance is 47 to 63 Hertz and the efficiency is 97.5% at the rated amps and on nominal line voltage. The output voltage range is 0 to the rated motor voltage and the output frequency range is 0 to 400 Hertz. It supports various stop modes including the Ramp, Coast, DC-Brake, Ramp-to-Hold, and also the S-Curve stop.

The 20AD1P1A0AYNANC0 features a heatsink thermostat that is monitored by a microprocessor-controlled excessive temperature trip. For the drive overcurrent trip, the 20AD1P1A0AYNANC0 features 20 to 160% of the rated current. The drive also has sensorless vector control with full tuning and a current limit capability for proactive current programmable from 20 to 160%. For communications, the 20AD1P1A0AYNANC0 features common industrial protocol and although there is no HMI included, it comes with an option for adding an HMI. The safety feature included is the DriveGuard Safe Torque-Off and it also comes with the speed and torque control with or without the encoder feedback. The 20AD1P1A0AYNANC0 comes in a compact enclosure and it is designed to meet space requirements.

Revision Part #Also known as
20AD1P1A0AYNANC0 Ser A20AD1P1A0AYNANC0/A, Series A, Rev A
Don't see your particular revision? Contact us now.