20AD5P0F0AYNANNN

The 20AD5P0F0AYNANNN is an Allen-Bradley manufactured drive and it is part of the Rockwell Automation product line. The drive comes from the PowerFlex 70 series. The current requirement of this AC drive is 5 Amps and it needs a 480 Volts AC supply to operate under a normal load. The drive uses a 3-phase line to draw electric power to it. The output power rating for this drive is 3 Horsepower. The Frame B body of the drive supports different mounting option. The front chassis of the drive is equipped with a flange mount with an IP20 rating. The rear side of the drive has a NEMA/UL Type 4X/12 enclosure with an IP66 rating. The rear side is water-resistant. The 20AD5P0F0AYNANNN drive can be used for both indoor and outdoor use. The drive has a factory-rated surrounding air temperature range between 0 and 40 degrees Celsius. The storage temperature of the drive when it is not in use is between -40 and 70 degrees Celsius.

The 20AD5P0F0AYNANNN is a drive mainly built for industrial purposes. The drive uses an IGBT braking system for controlling the motor devices, but a braking resistor is missing in the system. The drive has no feedback device. The drive has a voltage tolerance level of -10% minimum and +10% maximum and the input frequency tolerance lies between 47 and 63 Hertz. The drive has a displacement power factor of 0.98 across different speed ranges. The drive is rated to be 97.5% efficient at the rated current and the nominal line voltage. The drive has a maximum short circuit rating of 20000 Amps. During the installation of the 20AD5P0F0AYNANNN drive, the installation environment should be made clean and dry. The location should also be free from electric discharge. Proper ventilation is required in the installation room so that air flows in the proper manner through the heatsink of the drive.