20AD8P0A0AYYNNNN

The 20AD8P0A0AYYNNNN is a user-adjustable drive designed and manufactured by Allen-Bradley. The 20AD8P0A0AYYNNNN is shipped without an onboard human-machine interface module and its place is covered by a blank plate. The drive accommodates different types of wires depending on whether the wire is being used for power or signal wiring. For the signal wiring, the 20AD8P0A0AYYNNNN accepts 2 different types of wiring, the standard analog I/O and digital I/O wiring uses different types of wires. For the power wiring, the 20AD8P0A0AYYNNNN supports a wire that can withstand a temperature of 90 degrees Celsius. The power wiring can be done using the Belden 29501-29507 wire or its equivalent. Analog I/O signal wiring can be done using the Belden 8760/9460 or the Belden 8770 or its equivalent.

For the digital I/O signal wiring, the 20AD8P0A0AYYNNNN supports the Belden 8770 cable or a multi-conductor shielded cable with the same characteristics. Note that the signal wiring cables should have a minimum insulation of 300 Volts and that they can accommodate a temperature ranging between 60 degrees Celsius and 90 degrees Celsius. The Allen-Bradley 20AD8P0A0AYYNNNN operates at a voltage range of between 380 Volts AC and 480 Volts AC. The power supply for the drive should be 3-phased with 6 cycles. The drive is prone to reduced product life if the power system has power factor correction capacitors that are switched in and out of the system or when the power source has frequent interruptions.