150-B135NBDB

The Allen-Bradley company is the sole manufacturer of the 150-B135NBDB controller. It is a smart motor controller device and it comes from the SMC Dialog Plus series of Allen-Bradley controller devices. It is a device with a solid-state controller and it runs with an amperage of 135 Amps. The rated power is 100 Horsepower. The voltage rating is 460 Volts AC. This device has an open type of enclosure and it is a 3-phase device. A separate heatsink comes as a power requirement in this model. It has a pump control mechanism. The 150-B135NBDB is 10.09 inches long, 13.23 inches high, and 9.77 inches wide. The optimal running temperature for this controller device is in the range of 0 to 50 degrees Celsius. The device can be stored in a temperature range from -25 to 75 degrees Celsius. The humidity should be non-condensing with a 95% humid environment as the maximum humidity rating. The operating frequency can vary between 50 and 60 Hertz, depending on the load on the controller.

The 150-B135NBDB is controlled by using a microprocessor device and it is used widely for controlling squirrel cage induction motors. Various modes of operation come as standard features in this Allen-Bradley device. Some of the main modes are the selectable kickstart, the current limit start, and the full voltage smart. Similarly, the 150-B135NBDB also has various braking options. They are the soft stop, the pump control, the SMB braking method, and different preset slow speeds. This smart motor controller comes with various protective features too. The 150-B135NBDB has motor overload protection, stall protection, jam detection, under and over voltage protection, and other energy saving options.