2098-DSD-020X-DN

The 2098-DSD-020X-DN is an Allen-Bradley Digital Servo Drive (DSD) from the Ultra 3000 Product family of motion control components. This drive is mainly used to interface with Servo motors such as Allen-Bradley’s Kinetix Servo Motor series to implement motion and position control to the connected load. The 2098-DSD-020X-DN accepts feedback position data from encoders such as the Allen-Bradley sine/cosine and incremental external encoders from the Bulletin 842HR, 844D, 847H, and 847T. The 2098-DSD-020X-DN product is operable at an input supply voltage of 120VAC / 240 VAC, 1-Phase, 50-60 Hz, and an input current of 18 Amperes. This servo drive delivers an output voltage of 120 / 240 VAC, 3-Phase, programmable frequency range of 0-400 Hz, maximum continuous output current of 10 amperes, and maximum peak output current of 30 Amperes. It generates a continuous output power of 115 kW at 115 VAC input and 2.0 kW at 230 VAC input. The 2098-DSD-020X-DN has an integrated DeviceNet communication interface that allows the drive to directly communicate with DeviceNet capable controllers such as Allen-Bradley’s SLC and Logix controllers with appropriate DeviceNet scanner capability. This enables the driver to perform data exchange at high-speed communication and cover longer distances. Aside from the integrated communication interface, the 2098-DSD-020X-DN comes with a built-in indexing capability. With the indexing function, pre-configured servo motor movements can be stored in the servo drive’s memory which enables users to select the predefined indexing profile for a specific load or product type. These movements include acceleration, velocity deceleration, ramp-up, ramp down, positional data, and other parameters.

The Allen-Bradley 2098-DSD-020X-DN Ultra 3000 Digital Servo Drive module is a single-phase AC drive used for control of most industrial servo motors. This module comes with DeviceNet and Indexing. The 2098-DSD-020X-DN has an operating shock of 15g (3 pulses, 11 ms). The non-operating shock of this module is 30 g (3 pulses, 11 ms). This module is designed to maintain optimum functionality at 2.5 g vibration. This module can operate at altitudes of up to 1000 m (3280 ft) without derating. The operating temperature of this module is 0 -55 °C (32-131 °F). The storage temperature of this module is -40-70 °C (-40-158 °F). The relative humidity of this module is from 5-95% without condensation. The Allen-Bradley 2098-DSD-020X-DN weighs 2.1Kg (4.6 lbs). This module has 7.8 x 5.68 x 3.89 in (198.12 x 144.27 x 98.1 mm) dimensions. The Allen-Bradley 2098-DSD-020X-DN has an input voltage (AC) of 100-240V AC root means square (single-phase). The input frequency (AC) of this module is 47-63 Hertz. The nominal input current (AC) of this module is 18 A root means square. It also has a healthy 10 A (0-peak) continuous output current and 30 A (0-peak) intermittent output current. If you connect or disconnect the 2098-DSD-020X-DN module when the power is on, an electric arc can occur. This may cause an explosion in hazardous locations. Repeated electrical retractors can cause excessive wear and tear on the contacts on the module and on its mating connector. The Allen-Bradley 2098-DSD-020X-DN is a Digital Servo Drive that belongs to the Ultra 3000 series of servo drives. It is part of the Kinetix Motion Control system family, used for motion and positioning control of AC motors along with speed and torque control as well as protective start-up and shutdown of the connected servo motor. All these control capabilities enable a fully-functional motion control system designed to meet the varying requirements of different industrial applications. The 2098-DSD-020X-DN is essentially an indexing drive with a DeviceNet interface. It is powered by an external supply voltage of 100-240 Volts AC rms, 1-phase, with a frequency range of 47-63 Hertz. With the DeviceNet interface, the 2098-DSD-020X-DN digital servo drive can be configured to communicate over DeviceNet networks, allowing parameters to be accessed and integrated with control systems that support DeviceNet communication; particularly, Programmable Logic Controllers (PLC) or Programmable Automation Controllers (PAC). With indexing, a set of motion profiles can be defined based on a number of process situations. The indexing profiles can be efficiently repeated or switched without the need of redefining the operation. This saves a considerable amount of time as well as simplifies operation. The 2098-DSD-020X-DN is able to generate a continuous output current of 10 Amperes (0-pk) and an intermittent output current of 30 Amperes (0-pk). It has a continuous output power of 1.0 Kilowatt @ 115 Volts AC input supply voltage and 2.0 Kilowatts @ 230 Volts AC input voltage. This drive has an energy absorption capability of 125 Joules @ 115 Volts AC and 51 Joules @ 230 Volts AC.