800H-FRXTQH24RA1
This push button switch features a 30.5 mm mounting hole diameter and a vibrant red lens color. It includes one normally closed and one normally open contact configuration. Its thermal current rating
The Allen Bradley 800H push buttons are 30 mm push buttons that can be used in a wide range of industrial control applications, and they are designed to be durable. The 800H series includes push buttons with a range of colors, contact options, illumination options, and other features that users can select from. Color options for 800H push buttons include red, green, black, blue, gray, orange, and white. Some 800H Push Buttons models are available with legend caps that identify the push button and its functions. These push button models include models with green caps that have the legend "start" printed on them in white letters, and models with red caps that have the legend "stop" printed on them in white letters. Many 800H push buttons are made of durable Type 4/4X/13 plastic. Push buttons with contact configurations of 1 N.C., 1 N.O., or 1 N.C. and 1 N.O. are available in the 800H push buttons series. Some 800H push buttons are illuminated with either universal or transformer LEDs. The 800H push buttons are available with flush heads or with extended heads.
The Allen Bradley 800H push buttons can support vibration ratings of 10 to 2000 Hz and 0.06 inches of displacement/10 G peak-to-peak (except for the logic reed). The shock ratings of the 800H push buttons include 25 g for 11 ms (contact fragility) and up to 100 g with no damage. Some 800H push buttons have minimum mechanical lifespan ratings of 10,000,000 mechanical design lifecycles or actuations. Different models support different typical operating force ratings. The 800H push buttons that are non-illuminated and have no contact blocks support typical operating force ratings of 2 pounds maximum. The 800H push buttons that are illuminated have typical operating force ratings of 5 pounds maximum. The 800H push buttons typically support wires with gauges of #18 to 14 AWG, but some push buttons can support MaxDuty wire gauges of #18 to 10 AWG. These push buttons can operate at temperatures of -13 to 104 degrees Fahrenheit and be stored at temperatures of -40 to 185 degrees Fahrenheit. The components in the 800H push buttons are made of different types of plastic. The sockets, bushings, mounting rings, and non-illuminated caps are made of polyester, while the trim washers, thrust washers, and illuminated caps are made of nylon.
Browse available units in our catalog of 800H Push Buttons.
This push button switch features a 30.5 mm mounting hole diameter and a vibrant red lens color. It includes one normally closed and one normally open contact configuration. Its thermal current rating
Designed for versatility, this selector device operates at a maximum voltage of 600 V for both AC and DC applications. The thermal rating reaches up to 10 A AC and 2.5 A DC. Additionally, it accommoda
This push button has a momentary contact type and utilizes a transformer for operation. It features an extended head and comes in red lens color for visibility. The enclosure is rated Type 4/4X/13, en
This pilot light features a plastic housing and supports a maximum continuous thermal current of 10 A. It has an operating temperature range of –25 °C and is rated for shock resistance of 25 G. The ty
This pushbutton includes a contact block configuration of 1 normally closed and 1 normally open contact. It features a mushroom head type with a diameter of 30 mm and supports two positions for user i
Designed for versatility, the enclosure features four holes and a bottom conduit entry with a 3/4-inch knockout. The internal screw allows for secure grounding within the unit. This enclosure supports
This push-button operates effectively within a frequency range of 50 to 60 Hz and is rated for 240 V AC. It supports incandescent lamp types and utilizes a transformer for its illumination module. The
This selector switch features a maintained operator function and offers two switch positions for versatile control. It includes a contact block configuration with two normally open (NO) and two normal
This pushbutton station contains two actuating push buttons and is constructed for surface mounting with a 30 mm diameter hole size. It is housed in glass-filled polyester, enhancing durability, while
This push button operates with a rated voltage of 600 V AC and 600 V DC, handling currents of up to 10.0 A for AC and 2.5 A for DC applications. The contact configuration includes one normally open (N