Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley MPL Servo Motors MPL-A4540F-SK74AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

MPL-A4540F-SK74AA

|
Need a Specific Revision?

The MPL-A4540F-SK74AA servo motor is a low-inertia, high-output permanent magnet AC rotary servo motor from Allen-Bradley. It is a 200 Volts-rated MPL series motor with 3000 RPM of rated rotor speed and 2.6 kilowatts of rated output power. The MPL-A4540F-SK74AA servo motor features SpeedTEC DIN connectors, a keyless shaft extension, and an IP 50 rated protective housing without a shaft seal.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for MPL-A4540F-SK74AA

ManufacturerAllen Bradley
CategoryMotors
Product LineMPL Servo Motors
Part NumberMPL-A4540F-SK74AA
Weight15.00 lbs (6.80 kg)
DescriptionServo Motor
Inertia TypeLow Inertia
Voltage Class200 Volts
Rated Rated Speed3000 RPM
Frame Size130 Millimeters
Magnet Stack Length4 Inches
Feedback1024 sin/cos, Absolute Single-Turn Encoder
ConnectorsSpeedTEC DIN Connector, Right Angle, 180 Degrees Rotatable
Brake Option24V DC Holding Brake
Enclosure/Shaft KeyIP 50 Minimum (without Shaft Seal), Keyless Shaft
MountingFlange, IEC Metric, Free Mounting Holes
Request a Repair

The Allen-Bradley MPL-A4540F-SK74AA MPL series servo motor is a low-inertia, high-output permanent AC rotary servo motor. It is a brushless AC synchronous servo motor that was designed for compactness and versatility. The MPL-A4540F-SK74AA servo motor, like the other MPL series family motors, has a small frame size but it generates a lot of torque for its size. This servo motor has a frame size of only 130 millimeters but it provides a continuous stall torque level of 10.2 N-m and a peak stall torque level of 27.1 N-m. The MPL-A4540F-SK74AA servo motor has a voltage rating of 230 Volts and a rated rotor speed of 3000 RPM. In comparison to legacy servo motor models, the advanced winding technology on this MPL series low-inertia servo motor can generate up to 40 percent more torque per unit size. The magnet stack on the MPL-A4540F-SK74AA servo motor is 4 inches long. This low-inertia servo motor also comes with an integrated brake option with a supply voltage rating of 24 Volts DC.

The Allen-Bradley MPL-A4540F-SK74AA MPL series servo motor comes equipped with a single-turn encoder that provides high-resolution absolute feedback with the Hiperface protocol. This 230 Volts-rated servo motor has a rated output power of 2.6 kilowatts and its brake rotor inertia rating is 0.00056 kilograms per square meters. Its brake rotor weighs approximately 11 kilograms. The MPL-A4540F-SK74AA servo motor comes with DIN connectors that are rotatable up to 180 degrees for easier cabling. These SpeedTEC DIN connectors, which are available in several of the low-inertia MP-series motors, comply with a number of international standards, including the UL, NFPA 79, and RoHS standards. Allen-Bradley provides a wide range of power, feedback, and brake cables for the MPL-A4540F-SK74AA servo motor. This servo motor does not include a shaft key or shaft seal. Optional shaft seal kits for this MPL series servo motor are available, allowing the motor to achieve an IP 66 environmental protection rating instead of a standard IP 50 environmental protection rating.